Chrism2015

I have accidently added my media folder the the excluded list for the Docker Safe Perms is there a way to remove it?

I have just noticed a load of these in the syslog now and i think i saw some this morining could it have anythig to do with the problem? Dec 6 14:33:13 Origin kernel: XFS (md7): Metadata CRC error detected at xfs_dir3_block_read_verify+0x7c/0xf1 [xfs], xfs_dir3_block block 0x45b10a050

is there anyway to see the syslog from before the reboot?

how do i enable syslog server? the server is a 14 bay server and without the raid card i cant use all the bays

Sorry i throught it was attached origin-diagnostics-20221206-1215.zip

I recently added a parity disk to my server and after 3 days fo syncing it finished and said the parity was valid, i turend off the server to mov it and when i restarted it said the parity disk was dissabled so i remved the disk and re added it using instruction on a post on here and rebuilt the disk another 3 days it completed last night and said the parity was valid after a reboot this morning it again says the parity is valid but the disk is again dissbled as can be seen in the screenshot, both the shutdown and the reboot have been clean and the disk is brand new and when i plug it into a caddie the smart report is healthy. have i cnfigured the parity worng or could somthing else be the issue? Chris M

I'm also getting this error however i am using the hashed address as my local ip's dont show anything

i had a disk in my array which has failed (disk was faulty when installed) i need to remove the disk to RMA it but i cant find how to do this using the GUI, if i physically remove the disk the array wont start the disk doesn't have any data on and non of the shares/docker/VM's use the disk. i dont want to loose anything on the remaining disks but the only option i can find (new config) saya that the disks will appear as new disks which to me says they will be wiped can someone point me in the right direction.

I have lost access to all my shares today, the /mnt/user/ folder is missing and the dashboard is reporting no shares however if i ssh onto the server their is a folder called user0 that has all the folders in and the files and i haven't made any changes just tried to use plex and noticed that it was saying the files were missing then went on the dashboard and nothing. i do appear to be missing the folders for 2 vm's which are still running somehow

i only have the one disk installed in the server so it is set to one disk

I dont have a cache disk and below is the full error i get System.Data.SQLite.SQLiteException (0x80004005): database disk image is malformed database disk image is malformed at System.Data.SQLite.SQLite3.Reset (System.Data.SQLite.SQLiteStatement stmt) [0x00083] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at System.Data.SQLite.SQLite3.Step (System.Data.SQLite.SQLiteStatement stmt) [0x0003c] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at System.Data.SQLite.SQLiteDataReader.NextResult () [0x0016b] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at System.Data.SQLite.SQLiteDataReader..ctor (System.Data.SQLite.SQLiteCommand cmd, System.Data.CommandBehavior behave) [0x00090] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteDataReader..ctor(System.Data.SQLite.SQLiteCommand,System.Data.CommandBehavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader (System.Data.CommandBehavior behavior) [0x0000c] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at System.Data.SQLite.SQLiteCommand.ExecuteScalar (System.Data.CommandBehavior behavior) [0x00006] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at System.Data.SQLite.SQLiteCommand.ExecuteScalar () [0x00006] in <61a20cde294d4a3eb43b9d9f6284613b>:0 at Marr.Data.QGen.InsertQueryBuilder`1[T].Execute () [0x00046] in C:\BuildAgent\work\5d7581516c0ee5b3\src\Marr.Data\QGen\InsertQueryBuilder.cs:140 at Marr.Data.DataMapper.Insert[T] (T entity) [0x0005d] in C:\BuildAgent\work\5d7581516c0ee5b3\src\Marr.Data\DataMapper.cs:728 at NzbDrone.Core.Datastore.BasicRepository`1[TModel].Insert (TModel model) [0x0002d] in C:\BuildAgent\work\5d7581516c0ee5b3\src\NzbDrone.Core\Datastore\BasicRepository.cs:111 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push[TCommand] (TCommand command, NzbDrone.Core.Messaging.Commands.CommandPriority priority, NzbDrone.Core.Messaging.Commands.CommandTrigger trigger) [0x0013d] in C:\BuildAgent\work\5d7581516c0ee5b3\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:82 at NzbDrone.Core.Messaging.Commands.CommandQueueManager.Push (System.String commandName, System.Nullable`1[T] lastExecutionTime, NzbDrone.Core.Messaging.Commands.CommandPriority priority, NzbDrone.Core.Messaging.Commands.CommandTrigger trigger) [0x000b7] in C:\BuildAgent\work\5d7581516c0ee5b3\src\NzbDrone.Core\Messaging\Commands\CommandQueueManager.cs:95 at NzbDrone.Core.Jobs.Scheduler.ExecuteCommands () [0x00043] in C:\BuildAgent\work\5d7581516c0ee5b3\src\NzbDrone.Core\Jobs\Scheduler.cs:42 at System.Threading.Tasks.Task.InnerInvoke () [0x0000f] in <6649516e5b3542319fb262b421af0adb>:0 at System.Threading.Tasks.Task.Execute () [0x00000] in <6649516e5b3542319fb262b421af0adb>:0

I am also getting the database disk image is malformed all i have done is left sonarr running and after a complete re install (following the same error this morning) i have not changed any settings i literally added all the shows back and added the indexers and download client it added 3 shows that had been downloaded then the error came up

sorry forgot to include the syslinux config

i am trying t pass through a 4 port NIC to a vm, i have followed https://forums.unraid.net/topic/37959-guide-passing-through-network-controllers-to-unraid-6-virtual-machines/ and the 4 ports show as individual pci devices in the vm setup i have selected all 4, when i try to start the vm i get and execution error "internal error: qemu unexpectedly closed the monitor: 2019-04-20 21:50:53.229+0000: Domain id=5 is tainted: high-privileges 2019-04-20 21:50:53.229+0000: Domain id=5 is tainted: host-cpu 2019-04-20T21:50:53.343158Z qemu-system-x86_64: -device vfio-pci,host=86:00.0,id=hostdev0,bus=pci.0,addr=0x5: vfio error: 0000:86:00.0: failed to setup container for group 21: failed to set iommu for container: Operation not permitted" the vm log shows "LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name 'guest=Sophos UTM,debug-threads=on' -S -object 'secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-5-Sophos UTM/master-key.aes' -machine pc-i440fx-2.5,accel=kvm,usb=off,dump-guest-core=off,mem-merge=off -cpu host -m 6144 -realtime mlock=off -smp 4,sockets=1,cores=2,threads=2 -uuid 8414a580-39c0-dd31-cc89-b1448a08a202 -no-user-config -nodefaults -chardev socket,id=charmonitor,fd=25,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=delay -no-hpet -no-shutdown -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x7.0x1 -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x7.0x2 -device virtio-serial-pci,id=virs=pci.0,addr=0x8 -device vfio-pci,host=87:00.1,id=hostdev3,bus=pci.0,addr=0x9 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny -msg timestamp=on 2019-04-20 21:50:53.229+0000: Domain id=5 is tainted: high-privileges 2019-04-20 21:50:53.229+0000: Domain id=5 is tainted: host-cpu 2019-04-20T21:50:53.286537Z qemu-system-x86_64: -chardev pty,id=charserial0: char device redirected to /dev/pts/0 (label charserial0) 2019-04-20T21:50:53.343158Z qemu-system-x86_64: -device vfio-pci,host=86:00.0,id=hostdev0,bus=pci.0,addr=0x5: vfio error: 0000:86:00.0: failed to setup container for group 21: failed to set iommu for container: Operation not permitted 2019-04-20 21:50:53.345+0000: shutting down, reason=failed" i have also attached a txt file that includes the xml for the vm and the results for the device from both the lspci and the lspci -n commands. have i missed something or made a mistake in the setup? any advice or suggestions would be appreciated unraid-settings.txt

ive found a solution modifying some of the commands here https://fabianlee.org/2016/07/26/ubuntu-extending-a-virtualized-disk-when-using-lvm/

i created a vm with a 25G disk, that disk is now full and i have increased the disk to 150G however i am unable to expand the partition i have tried following differnt articals and suggestions but when i specify the partition it says "The filesystem is already 5904384 (4k) blocks long. Nothing to do!" i have also tried to use the gparted live iso but that says there is no space to expand the disk into. can someone point me in the right direction or point out what im doing wrong?

Does anyone know how to install an SSL certificate when using this docker image? i am trying to configure access to nextcloud using a reverse proxy and i need to install the ssl the proxy uses on the image