CHINCB

Members
  • Posts

    10
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

CHINCB's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Unmanic seems to be pinning one of my CPU cores to 100% when running even if there is nothinf in the que, any advice?
  2. Hey all, Don't know if this is a possibility now or if it should be a feature request but is there a way to set unmanic to stop trying to encode a failed file after the first one or two attempts, I have spent a lot of time recoding basically everything i have but now with using it only to do new downloads if something fails it keepsretrying on every scan.
  3. Looks like I am having issues with all linuxserver dockers, refused connection on every single one of them
  4. Hoping for some help, I have installed LL docker but when i try and open it I get a connection reffused error. See below for the logs:
  5. After installing it I tested it with a couple of single files and it worked great, then looking to see what happened I turned it loose on my whole collection of series, after 8 hours for scanning it has yet to start and I believe it is due to the scanning process just taking incredibly long to complete. If I might suggest a feature it would be to limit the queue length, so that after for instance 100 files have been queued the scanning process is stopped.
  6. Ok, I've been able to set it up correctly, one issue, albiet minor, is that the docker on my setup has no icon, only a question mark.
  7. I am trying to install this docker and after finding in in common apps I get a completely empty docker page with none of the predefined variables, how can i get the correct docker to install?
  8. Being of low experience with hard drives can someone please have a look at the smart report for this drive and tell me if it is ok? My concern is the raw value for the read error and ECC-recovered. TIA smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.33-Unraid] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 3.5 Device Model: ST4000DM004-2CV104 Serial Number: WFN1DB27 LU WWN Device Id: 5 000c50 0bf6c894a Firmware Version: 0001 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5425 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 10 09:20:53 2019 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 479) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 083 067 006 - 212554774 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 14 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 064 060 045 - 2669710 9 Power_On_Hours -O--CK 100 100 000 - 11 (207 136 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 14 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 063 040 - 33 (Min/Max 33/34) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 193 Load_Cycle_Count -O--CK 100 100 000 - 14 194 Temperature_Celsius -O---K 033 040 000 - 33 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 083 067 000 - 212554774 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 10h+12m+39.790s 241 Total_LBAs_Written ------ 100 253 000 - 1886597912 242 Total_LBAs_Read ------ 100 253 000 - 7814167217 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbd GPL VS 8 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/34 Celsius Lifetime Min/Max Temperature: 21/37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (37) Index Estimated Time Temperature Celsius 38 2019-05-05 04:23 ? - ... ..( 88 skipped). .. - 127 2019-05-08 19:54 ? - 0 2019-05-08 20:53 28 ********* 1 2019-05-08 21:52 ? - 2 2019-05-08 22:51 21 ** 3 2019-05-08 23:50 ? - 4 2019-05-09 00:49 27 ******** 5 2019-05-09 01:48 ? - 6 2019-05-09 02:47 30 *********** 7 2019-05-09 03:46 ? - 8 2019-05-09 04:45 30 *********** 9 2019-05-09 05:44 ? - 10 2019-05-09 06:43 31 ************ 11 2019-05-09 07:42 ? - 12 2019-05-09 08:41 30 *********** 13 2019-05-09 09:40 ? - 14 2019-05-09 10:39 28 ********* 15 2019-05-09 11:38 ? - 16 2019-05-09 12:37 29 ********** 17 2019-05-09 13:36 ? - 18 2019-05-09 14:35 28 ********* 19 2019-05-09 15:34 ? - 20 2019-05-09 16:33 28 ********* 21 2019-05-09 17:32 ? - 22 2019-05-09 18:31 28 ********* 23 2019-05-09 19:30 ? - 24 2019-05-09 20:29 28 ********* 25 2019-05-09 21:28 ? - 26 2019-05-09 22:27 29 ********** 27 2019-05-09 23:26 36 ***************** ... ..( 2 skipped). .. ***************** 30 2019-05-10 02:23 36 ***************** 31 2019-05-10 03:22 35 **************** 32 2019-05-10 04:21 35 **************** 33 2019-05-10 05:20 34 *************** 34 2019-05-10 06:19 34 *************** 35 2019-05-10 07:18 35 **************** 36 2019-05-10 08:17 ? - 37 2019-05-10 09:16 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 14 --- Lifetime Power-On Resets 0x01 0x010 4 11 --- Power-on Hours 0x01 0x018 6 1886597912 --- Logical Sectors Written 0x01 0x020 6 1408404 --- Number of Write Commands 0x01 0x028 6 7814188409 --- Logical Sectors Read 0x01 0x030 6 7324941 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10 --- Spindle Motor Power-on Hours 0x03 0x010 4 10 --- Head Flying Hours 0x03 0x018 4 14 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 12 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 26 --- Lowest Temperature 0x05 0x030 1 - --- Highest Average Short Term Temperature 0x05 0x038 1 - --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16 --- Number of Hardware Resets 0x06 0x010 4 8 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS