Yoda_1204

I have a sophos XG Firewall that has 5 different public IP address on it. I want to find out if the below is possible to do with Nginx Proxy manger. I want to point each public IP address to a different Unraid - Nginx Proxy Container. (So I would have a total of 5 Nginx Proxy containers). Is this possible to do? I have tried this with two Nginx Proxy contains with no look so far. The first one always works, but the second one does not. I have changed all of the ports and data paths to different locations. Thank you in advance

Thank you for the reply. I could not get unraid to even startup after the OS Unraid selection I just flashed the P6T Deluxe Bios again Now it is working.

Please add the Asus P6T Deluxe motherboard drivers to Unraid 6.10.0 RC2. The drivers for Linux 64 are located here https://www.asus.com/supportonly/P6T Deluxe V2/HelpDesk_Download/ Please let me know if this is possible. I know the bios and Marvell raid controller are from January 2009. I am also attaching the drivers here. LinuxDrivers P6T Deluxe.zip

Sorry I forgot to put the docker container links here https://hub.docker.com/r/espocrm/espocrm https://hub.docker.com/r/mautic/mautic for version 4

I have been trying very hard to learn how to install Mautic 4, and ESPOCRM Docker containers in unraid 6.9.2. I have not been successful yet. How can we request that Mautic 4, and ESPOCRM Docker containers get added to the community Applications? P.S. if someone could help me with the install I can work something out with them also. Thank You

Thank you. I have set everything back top how it was. Then Changed the setting in the community App to search the docker hub. I can now see the whale. Thank you and sorry for the headache I caused

ok sorry, I misunderstood the reply. I am checking for the setting in the Community application

Ok I have done the following (But I still cannot find it): I have put these repositories in the docker setting: https://github.com/limetech/docker-templates https://hub.docker.com/ https://hub.docker.com/r/universalmediaserver/ums I went to the Community Applications and searched for universalmediaserver It did not find anything and it did not show a whale that I could click on. Thanks

Thank you I will try that.

I am trying to get Universal Media Server Installed in UNRAID version 6.8.3. I was not able to find a template for this program. But they do have a Docker Container download command. "Run docker pull universalmediaserver/ums" I am a newbie when it comes to Docker anything. I have search through the forums, but could not find any information on doing this. Any Ideas on how to get this installed or how to get a template created for this? Thank you

I solved this with installing DiskInternals with admin credentials. Now I can see the files.

I am trying to read a physical 5.1 Unraid drive in windows using Disk Internals Linux Reader Pro. It see's the Hard Drive and lets me mount the drive. But When I open the Drive I see 1 Directory (FileSystem) and 1 File (Storage) that is the full size of the disk. I don not see any files in the directories. The reason for this is because I tried to upgrade to the new version 6 but the Rocket 640 raid controllers were not found. So I tried to get my back up of the unraid usb. (Which I put on the Unraid drive (really smart here NOT) which is not reachable anymore as the drives cannot be seen. Any help here is very much appreciated.

I am trying to get data off of a old 5.1 and 4 unraid system drive. Using Windows 10 and Diskinternals Linus Reader Pro. When I mount the disk I only see 1 direrctory (FileSystem) with nothing in it and 1 file (Storage that is using the maximum size) How do I see the files that are on the disks? I think I am missing a step. P.S. I did look through the message boards her for the past 2 hours.

running this script does let all of the drives show in the new version of Unraid

Hi have also just upgraded to the latest and greatest version "Unraid 2015-11-17 unRAIDServer-6.1.4-x86_64.zip ". The tower server in tools system devices sees the card as "03:00.0 RAID bus controller: HighPoint Technologies, Inc. RocketRAID 640 4 Port SATA-III Controller (rev 01) 04:00.0 RAID bus controller: HighPoint Technologies, Inc. RocketRAID 640 4 Port SATA-III Controller (rev 01)". But no drives show up. I am trying to figure out the scrypt again so I can try this next.

Is anyone from UNraid going? or anyone from the forums going? I am going to try and go but it depends on my work. here is the link and some information. LinuxFest Northwest is April 28th and 29th in Bellingham, Washington and is one of the longest-running grass roots Linux fests. LFNW is free of charge and attracts presenters from around the world. http://linuxfestnorthwest.org/

Thanks for the quick response. I really do like the rocketraid 640, but it is not on the list(Plus i already have this card). I know that i do not have much experience with Linux, but I would be willing to help the UNraid community get this controller supported from UNraid. I will start searching for how to add the drivers and then recompile the OS. So it will be learning time for me. Does anyone have any good links that might help me in my mission to get the RocketRaid 640 added to linux and recompile the OS. Thanks

I have now come to the conclusion that i need to build my first unraid server. So I have the following hardware(I will be more specific tomorrow when i get back to town.) Asus P5WD2-E premium 2 gb ram onboard Marverl SATA controller radeon 1950 pro Rocketraid 640 4port that is capable of running 20 drives using port multiplier 2 3TB seagate drives 1 40gb test cache drive ( have a 1TB 7200rpm cache drive ordered) Issue: UNRAID does not see the Rocketraid controller Possible fix: Loading the linux driver. I have the Linux driver disk that came with the RocketRaid 640, but i do not know how to install this driver on linux. alas i am a windows guy. Sorry.. Any help would be very much appreciated. I am in this for the long haul!!! if we need to get error logs and more information on my system i am up for it. i am up for going deeper in linux if need to. Thanks