stepehn311 Posted January 27, 2021 Share Posted January 27, 2021 (edited) now I'm using unraid 6.8.2, few days ago I bought new pcie device : Mellanox ConnectX-4 Lx MCX4121A-XCAT with dual 10G network, then I found it doesn't work in unraid, I use this cmd to look for detail and I successed : dmesg | more | grep 04:00 the msg shows me system couldn't identify the device's firmware which is 14.28.2006, unraid just allow fw below 14.14.1100. the I go to Mellanox.com, the eralyest fw version is 14.18.2000, I've tested and failed again. I've seen the update notes of unraid 6.8.3 which is no update about drivers SO I wonder know if unraid 6.9 release will support , then I can wait and update, or change to other system Thanks A lot Edited January 29, 2021 by stepehn311 Quote Link to comment
ich777 Posted January 27, 2021 Share Posted January 27, 2021 32 minutes ago, stepehn311 said: now I'm using unraid 6.8.2, few days ago I bought new pcie device : Mellanox ConnectX-4 Lx MCX4121A-XCAT with dual 10G network, then I found it doesn't work in unraid, I use this cmd to look for detail and I successed : dmesg | more | grep 04:00 the msg shows me system couldn't identify the device's firmware which is 14.28.2006, unraid just allow fw below 14.14.1100. the I go to Mellanox.com, the eralyest fw version is 14.18.2000, I've tested and failed again. I've seen the update notes of unraid 6.8.3 which is no update about drivers SO I wonder know if unraid 6.9 release will support , then I can wait and update, or change to other system Thanks A lot Is the adapter in InfiniBand or Ethernet mode? The adapter have to be in ethernet mode to work, have no problem with my Mellanox ConnectX-3 (it also uses the mlx4_core). mlx4_core 270336 1 mlx4_en EDIT: I also have to say I'm on 6.9.0RC2 and have my Mellanox Firmware Tools Plugin installed (you should be able to switch between the modes with this tool and also to flash another firmware). Quote Link to comment
stepehn311 Posted January 27, 2021 Author Share Posted January 27, 2021 Thanks ! And this Adapter is always working in Ethernet mode. I've tried burn in these firmwares: 14_17_2020 14_18_2000 14_27_1016 14_28_2006 14_29_1016 It shows me the same error msg, and I use lshw to check device's status: lshw -c network There's no valid driver works , just like my video card (HPE Mircoserver Gen , AMD x3421) Something funny that the device isn't running by driver : mlx4_core & mlx4_en , but by driver : mlx5_core I hesitate to update system to 6.9rc2 a little, that I'm waiting for a stable release version to avoid damaging my data. 4 hours ago, ich777 said: Mellanox Firmware Tools You mean if I update to 6.9rc2 then I can install this MFT from mellanox official? because I didn't see it in Community Applications Quote Link to comment
ich777 Posted January 27, 2021 Share Posted January 27, 2021 2 minutes ago, stepehn311 said: And this Adapter is always working in Ethernet mode. I think this adapter has two modes or am I wrong one is InfiniBand and one is Ethernet. 3 minutes ago, stepehn311 said: You mean if I update to 6.9rc2 then I can install this MFT from mellanox official? because I didn't see it in Community Applications You have to upgrade to 6.9.0rc2 first then you will see my Plugin in the CA App, these are the open source MFT tools that I compile for every release of Unraid (then you can access the Mellanox commands from Unraid itself): Quote Link to comment
BRiT Posted January 27, 2021 Share Posted January 27, 2021 That's a pure Catch-22 if this card is the only one you're using for networking, right? You can't get networking working with it until the plugin is installed but can't get plugin installed until the card is working. Quote Link to comment
stepehn311 Posted January 28, 2021 Author Share Posted January 28, 2021 18 hours ago, BRiT said: That's a pure Catch-22 if this card is the only one you're using for networking, right? You can't get networking working with it until the plugin is installed but can't get plugin installed until the card is working. Luckly It's impossible, because there's an on-board ethernet . My computer has only one pci-e 3.0 x 8 , and no more power cable for hdd, so I've no more choice to update this system. And Thanks for responsing my question so quickly and accurate , I'll try to update 6.9rc2. By the way, Is there any schedule about final release of 6.9? I think I'm not the only one waiting for it . Quote Link to comment
ich777 Posted January 28, 2021 Share Posted January 28, 2021 1 hour ago, stepehn311 said: I think I'm not the only one waiting for it . I think this is the appropriate answer: Soon™ 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.