BobNik Posted February 1, 2021 Share Posted February 1, 2021 Hi, array of 9 disks (8 data + parity) and cache drive.... The parity just started and within a minute I got a warning that one disk is 'disabled' and parity and the array stopped.. The log (attached) shows lot of read and then write errors. The disk shows healthy and smart diagnostic found no problem but the disk is disabled. Any suggestion how to put it back into the array (new config?) or the disk is not to be trusted and require a replacement? Or any other suggestion please. Regards BobNik log.txt Disk8-smart.txt Quote Link to comment
JorgeB Posted February 1, 2021 Share Posted February 1, 2021 Looks more like a controller problem, you're using a SASLP/SAS2LP and those have been known to drop disks without a reason, though that disk is quite old and showing some issues, still recommend replacing it with an LSI HBA. Quote Link to comment
BobNik Posted February 1, 2021 Author Share Posted February 1, 2021 (edited) Thank you Jorge. Is there a recommended model? Edited February 1, 2021 by BobNik typo Quote Link to comment
BobNik Posted February 1, 2021 Author Share Posted February 1, 2021 Yes, thank you. The first I found is "10Gtek Internal PCI Express SAS/SATA HBA RAID Controller Card, LSI SAS2008 Chip, 8-Port 6Gb/s, Same as LSI 9211-8I". Looks this model have an old firmware that require to be updated. Have anyone have experience with this model and how to upgrade the firmware? I appreciate any help. Regards BobNik Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.