bk101 Posted February 11, 2021 Share Posted February 11, 2021 (edited) Recently jumped hard on to the UNRAID bandwagon and I'm loving it so far, learnt a lot since first starting to use it, I've run in to an issue and was hoping someone could help. I'm running preclear on a few drives and one is currently at 97% (pre-read) but going as slow as 1mbps every so often, there appears to be no SMART errors or any indication as to why, I've tried to have read through the logs but I'm not familiar enough to spot the issue, nothing obvious jumps out. Could someone please help me out? The slow speeds is on a brand new 8TB Toshiba drive device SDG I know SDI has some CRC errors which I believe is due to the HBA, waiting for these preclears to finish before I further investigate that Also SDO has 4632 current pending sectors, which I believe means the drive is failing. Can someone confirm? I've attached the syslog. Edited February 14, 2021 by bk101 Quote Link to comment
trurl Posted February 11, 2021 Share Posted February 11, 2021 Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
bk101 Posted February 12, 2021 Author Share Posted February 12, 2021 (edited) On 2/11/2021 at 11:20 PM, trurl said: Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Attached, thanks. It seems like the pre-read is finally done, but it took 3-4 times longer than another identical disk. It's like it gets slower towards the end. It's currently zeroing at normal speeds, but will be interesting to see if it slows down towards the end again. This disk was actually my parity drive before and didn't have any issues with the first parity build but later on when it did a parity check it was this slow towards the end as well. Edited February 14, 2021 by bk101 Quote Link to comment
bk101 Posted February 12, 2021 Author Share Posted February 12, 2021 Anyone able to take a look please? Quote Link to comment
JorgeB Posted February 12, 2021 Share Posted February 12, 2021 After the preclear is done run the diskspeed docker. Quote Link to comment
bk101 Posted February 13, 2021 Author Share Posted February 13, 2021 19 hours ago, JorgeB said: After the preclear is done run the diskspeed docker. SDG and SDI are identical disks both brand new 8TB drives Quote Link to comment
JorgeB Posted February 14, 2021 Share Posted February 14, 2021 sgd has issues, doesn't mean it's going to fail soon but it's not performing normally, also more likely that in time those slow sector will result in bad sectors, if you can return and get a new one I would. Quote Link to comment
bk101 Posted February 14, 2021 Author Share Posted February 14, 2021 44 minutes ago, JorgeB said: sgd has issues, doesn't mean it's going to fail soon but it's not performing normally, also more likely that in time those slow sector will result in bad sectors, if you can return and get a new one I would. Ok, no worries. They're still under warranty so will contact manufacturer to arrange a replacement. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.