jeffrey.el Posted June 14, 2021 Share Posted June 14, 2021 (edited) Hello! I just replaced my motherboard for my UnRaid server with a new Gigabyte MD70-HB0 motherboard. This board has 2 x 10GbE BASE-T LAN ports (Intel® X540) on it, but I can't seem to get these to work... Does anybody maybe have an idea why? I've added in an extra PCI-E ethernet expansion card so I can access the GUI, but I would love to have these 2 ports working and I can't find much about it... Edited June 14, 2021 by jeffrey.el Quote Link to comment
ChatNoir Posted June 14, 2021 Share Posted June 14, 2021 Your diagnostics could provide information on the initialization of the NICs, their status, etc. Quote Link to comment
jeffrey.el Posted June 14, 2021 Author Share Posted June 14, 2021 12 minutes ago, ChatNoir said: Your diagnostics could provide information on the initialization of the NICs, their status, etc. obscurity-diagnostics-20210614-1757.zip There you go! Quote Link to comment
JorgeB Posted June 14, 2021 Share Posted June 14, 2021 Only the gigabit NICs are being detected, this is not an OS problem, check to see if the NICs are enable in the BIOS. Quote Link to comment
jeffrey.el Posted June 14, 2021 Author Share Posted June 14, 2021 4 hours ago, JorgeB said: Only the gigabit NICs are being detected, this is not an OS problem, check to see if the NICs are enable in the BIOS. Hmm oke, I thought they where working because they are enabled in the bios... I'll look in to that then, thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.