monoman Posted August 3, 2021 Share Posted August 3, 2021 Hello, I'm running Unraid OS 6.9.2 Plus on an older R630. Whenever the machine reboots it seems to lose its configuration and it boots back into the initial Tower configuration. The only way to fix this is to restore the config folder from a backup on another machine and reboot again. I've tried booting from USB2 and 3 ports, changed the flash drive to a high quality stick, tried BIOS and UEFI but the problem persists. Not even sure how to debug this? Any ideas, please let me know. Quote Link to comment
ChatNoir Posted August 3, 2021 Share Posted August 3, 2021 24 minutes ago, monoman said: Hello, I'm running Unraid OS 6.9.2 Plus on an older R630. Whenever the machine reboots it seems to lose its configuration and it boots back into the initial Tower configuration. The only way to fix this is to restore the config folder from a backup on another machine and reboot again. I've tried booting from USB2 and 3 ports, changed the flash drive to a high quality stick, tried BIOS and UEFI but the problem persists. Not even sure how to debug this? Any ideas, please let me know. Hello, are you sure your flashdrive is not read-only ? You can provide your Diagnostics so we can have a look. Go to Tools / Diagnostics and attach the full zip file to your next post. Quote Link to comment
monoman Posted August 3, 2021 Author Share Posted August 3, 2021 Here you go! metal-diagnostics-20210803-1459.zip Quote Link to comment
ChatNoir Posted August 3, 2021 Share Posted August 3, 2021 Are you using a RAID controller ? It is possible that it is not assigning the same serial number to the drive at each boot thus causing the issue. Quote Link to comment
monoman Posted August 3, 2021 Author Share Posted August 3, 2021 There's a physical RAID controller in the machine, but it's not enabled. Quote Link to comment
JorgeB Posted August 4, 2021 Share Posted August 4, 2021 Diags you posted look normal, I assume they were taken after a restore, post new ones after the problem. Quote Link to comment
monoman Posted August 4, 2021 Author Share Posted August 4, 2021 When I replicate the problem (so when it boots into a clean Tower config) and run diagnostics, I can see the log file saved in the /boot/logs directory. Then, when I mount the stick on another computer, the file isn't there ... Quote Link to comment
itimpi Posted August 4, 2021 Share Posted August 4, 2021 23 minutes ago, monoman said: When I replicate the problem (so when it boots into a clean Tower config) and run diagnostics, I can see the log file saved in the /boot/logs directory. Then, when I mount the stick on another computer, the file isn't there ... That suggests that the flash drive is not mounted at /boot as it should be and as a result the /boot location is just in RAM if you go into the console then you can try the ‘df’ command to see what (if anything) is mounted at /boot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.