yoyomama Posted October 29, 2021 Share Posted October 29, 2021 Just finish to install UnRaid and basic plug in, finally figure out how to mount disks. Reboot and all the sudden not recognizing anymore the network etho disconnected check the cable, the cable is been replaced and even with new one nothing. Led on the ethernet is flashing... but what really struck me not recognizing my passwords anymore like I try to access at different system please any suggestions Quote Link to comment
ChatNoir Posted October 29, 2021 Share Posted October 29, 2021 Are you trying to login from the console on the server or on the WebGUI ? Quote Link to comment
yoyomama Posted October 29, 2021 Author Share Posted October 29, 2021 (edited) thank you for replaying only console or webgui on the server wont see the network until early was a 192.168.1.30 and than after reboot 192.168.0.125 so no webgui from network... root passwords not more recognized on the consol. I reboot with a fresh usb new install and same problem with network, I can get in the root with admin password as default but I still have problem not seeing the network like not detecting it. Ethernet physicals port is flashing 1000Mb Edited October 29, 2021 by yoyomama Quote Link to comment
yoyomama Posted October 29, 2021 Author Share Posted October 29, 2021 I was able to enter with new usb fresh start and force the network interface with static IP as not getting detected from Auto assignment IP Still not cool I had to restart and lost all the initial setup and lost all the sudden the password for the root Quote Link to comment
trurl Posted October 29, 2021 Share Posted October 29, 2021 3 hours ago, yoyomama said: was a 192.168.1.30 and than after reboot 192.168.0.125 In your router, reserve IP by MAC address, then you will get that reserved IP when you use DHCP. 1 Quote Link to comment
yoyomama Posted October 29, 2021 Author Share Posted October 29, 2021 (edited) now I am in the mess of the app not loading not sure what to do. There is any command line to stop debugging enable? Edited October 29, 2021 by yoyomama Quote Link to comment
yoyomama Posted October 29, 2021 Author Share Posted October 29, 2021 Okay, I had to get in to CA settings and I got lucky as not let me easy get off the refresh loading What a trip, Unraid its really fagile not easy and really intuitive, need to keep in mind many details and when something is off gotta figure out Quote Link to comment
yoyomama Posted October 29, 2021 Author Share Posted October 29, 2021 I just upload it on the community too https://forums.unraid.net/topic/38582-plug-in-community-applications/page/144/?tab=comments#comment-1048736 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.