Nodiaque Posted December 9, 2021 Share Posted December 9, 2021 (edited) Hello everyone, I have an unraid server that is running for about 2 weeks now. Current scenario is cache pool with 1tb and 512gb SSD in raid 1 and array of 2tb parity disk and 1tb data disk. The array disk are installed simply for me waiting for the real hdd, 3x 16tb. In the meantime, no share were made, only dockers container. I was wondering, can I put all the share (auto share like appdata) on cache only so everything is copied to the cache (I got about 20gb space used), then scrap the whole array, put in the new hdd (I don't have enough sata port to connect all of them at the sametime without removing older one) and then go from there? The parity check on the 16tb is estimated to 3 days, I don't want it to rebuild each time I put a new drive and I though if I put everything on cache, it should work, no? Thank you Edited December 11, 2021 by Nodiaque Quote Link to comment
JorgeB Posted December 10, 2021 Share Posted December 10, 2021 10 hours ago, Nodiaque said: can I put all the share (auto share like appdata) on cache only so everything is copied to the cache (I got about 20gb space used), then scrap the whole array, If it all fits there you can, set all shares to cache=prefer and run the mover, files can't be in use or they won't be moved. Quote Link to comment
Nodiaque Posted December 10, 2021 Author Share Posted December 10, 2021 Yeah, that's what I did. But now, it doesn't want me to replace the parity and data disk at the sametime, thus I need to put back one of my old drive. If I do New Config, do I loose all my dockers /vm config (in fact, what do I lose? Quote Link to comment
JorgeB Posted December 10, 2021 Share Posted December 10, 2021 31 minutes ago, Nodiaque said: it doesn't want me to replace the parity and data disk at the sametime You'll need to do a new config, data on the cache will remain. Quote Link to comment
Nodiaque Posted December 10, 2021 Author Share Posted December 10, 2021 Ok, and doing so, this won'T remove vm and docker from the gui (like I don't have to redo all my docker config or other stuff, it's just the array config that's wipe?) Quote Link to comment
JorgeB Posted December 10, 2021 Share Posted December 10, 2021 29 minutes ago, Nodiaque said: this won'T remove vm and docker from the gui No. Quote Link to comment
trurl Posted December 10, 2021 Share Posted December 10, 2021 19 hours ago, Nodiaque said: cache pool with 1tb and 512gb SSD in raid 1 The total capacity of this configuration is equal to the smaller of the 2 drives, 512GB, since it is a mirror. Quote Link to comment
Nodiaque Posted December 11, 2021 Author Share Posted December 11, 2021 Yeah I know. I had these 2 drives in my pc so while I know 512GB is lost, it's better then have only 1 SSD in the cache and no protection. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.