kbrutlag Posted December 11, 2021 Share Posted December 11, 2021 UNRAID masterminds.... So I had my single 8TB parity drive fail and all I had to replace it quickly is a 4TB drive. No problem I thought since all the data drives are 4TB - oh, but wait, UNRAID won't let me because it says the 8TB drive is missing and the 4TB drive is not the largest in the system because of it. How do I go about telling UNRAID to forget about the 8TB drive so I can get the 4TB as the parity drive? Thanks Quote Link to comment
trurl Posted December 11, 2021 Share Posted December 11, 2021 https://wiki.unraid.net/Manual/Storage_Management#Reset_the_array_configuration Quote Link to comment
kbrutlag Posted December 11, 2021 Author Share Posted December 11, 2021 That looks a little scary - like it'll remove all the existing data is what it sounds like, especially the 'you have been warned' part. Seriously though, the only way to tell the system to remove a bad/missing drive is to start a new config? Like most, I have a TON of data I don't want to loose, granted the VERY important stuff is backed up but the other TBs of data is still important. Quote Link to comment
trurl Posted December 11, 2021 Share Posted December 11, 2021 Are you sure you read all of it? Quote Unraid will recognize if any drives have been previously used by Unraid, and when you start the array as part of this procedure the contents of such disks will be left intact. Quote Link to comment
trurl Posted December 11, 2021 Share Posted December 11, 2021 All New Config does is reset your disk assignments, and optionally (by default) rebuild parity. All disks will be kept just as they are, except any disk assigned to any parity slot will have parity built. Building parity reads all the data disks, calculates parity, and writes the result to the parity disk. No disks except those assigned to parity slots are changed in any way. The warning is to keep you from resetting your disk assignments when you are in a situation where you need to rebuild a data disk. When you reset the disk assignments, Unraid forgets that any data disk needs to be rebuilt. Quote Link to comment
kbrutlag Posted December 11, 2021 Author Share Posted December 11, 2021 Guess I didn't retain the important part, I appreciate you pointing that section out. I'll have a go at it and let you know. Thanks again. Quote Link to comment
kbrutlag Posted December 12, 2021 Author Share Posted December 12, 2021 I have reset the configuration and am still unable to assign any new 4TB drive I have (6 others all same MFG and type as array) as a new parity drive, Unraid still reports them all as 'Parity slot not biggest'. I've attached each drive to a different computer and deleted the 1 partition they each had and I'm still getting the same message. Is there a way to find out why? Thanks for all your assistance. Quote Link to comment
Squid Posted December 12, 2021 Share Posted December 12, 2021 Is the new 4TB a shucked drive? Quote Link to comment
kbrutlag Posted December 12, 2021 Author Share Posted December 12, 2021 No, all are 2.5" internal SATA drives. I just did a drive listing (dmesg | grep blocks) and all are reporting the same size (4.00 TB/3.64 TiB). Quote Link to comment
trurl Posted December 12, 2021 Share Posted December 12, 2021 attach diagnostics to your NEXT post in this thread Quote Link to comment
Squid Posted December 12, 2021 Share Posted December 12, 2021 Yeah, but we're talking kilobytes here. A single byte smaller is enough to toss that error. Reason I brought up shucked is that a ton of times a shucked drive also has an HPA partition which very slightly lowers the capacity. Quote Link to comment
kbrutlag Posted December 13, 2021 Author Share Posted December 13, 2021 I appreciate the assistance, but I needed to get things going again so attached a 8TB 3.5" eSATA drive. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.