Jump to content

2nd USB drive is dying


devros

Recommended Posts

It's been a bad year for boot drives for me.  My 2nd one this year now seems to be on the way out.  Unfortunately my SM motherboard doesn't have any USB 2 ports.  For now I can shut the server down, pull the USB drive, repair it on my Mac and my unraid server will boot again, but it's now getting to the point it will only last for a few days before linux kicks it offline.  dmesg is filled with:

 

[349517.230113] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230115] blk_update_request: I/O error, dev sda, sector 625365 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[349517.230123] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230124] blk_update_request: I/O error, dev sda, sector 625366 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[349517.230132] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230133] blk_update_request: I/O error, dev sda, sector 625367 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[349517.230141] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230143] blk_update_request: I/O error, dev sda, sector 625368 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[349517.230151] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230152] blk_update_request: I/O error, dev sda, sector 625369 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[349517.230160] sd 0:0:0:0: [sda] tag#0 access beyond end of device
[349517.230167] sd 0:0:0:0: [sda] tag#0 access beyond end of device
 

same thing happened to me in June so I can't automatically do a license transfer to a new thumb drive.

 

I know the main bit of advice here is to use a USB2 port, but since I have none, does using a small USB2 hub plugged into a USB3 port make any sense?

 

Also, based on the dmesg errors, I think I'm running out of runway before this totally dies.  Is it possible to have the system allow me to do another USB change within a year.  I have the full pro License.

 

thanks,

dev

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...