NostyBoy Posted March 8, 2022 Share Posted March 8, 2022 Hi Guys, New to Unraid so please forgive me if i've done anything dumb My server was working fine for some time, then i started getting an error saying "/var/log is getting full" i rebooted my array and things continued to work for a while Now it tells me the log is full and my cache drive and docker image cannot be written to I've attached the logs, any help is appreciated bamboo-diagnostics-20220308-1741.zip Quote Link to comment
Solution JorgeB Posted March 8, 2022 Solution Share Posted March 8, 2022 Mar 6 12:44:08 Bamboo kernel: BTRFS info (device sde1): bdev /dev/sde1 errs: wr 0, rd 0, flush 0, corrupt 510952, gen 0 Mar 6 12:44:08 Bamboo kernel: BTRFS info (device nvme0n1p1): bdev /dev/nvme0n1p1 errs: wr 0, rd 0, flush 0, corrupt 3707, gen 0 Lots of data corruption being detected on both pools, start by running memtest. Quote Link to comment
NostyBoy Posted March 9, 2022 Author Share Posted March 9, 2022 Thanks for this! I ran memtest and it looks as though I have issue's 😂 Would it be a simple case of replacing the RAM and restarting my array? Quote Link to comment
ChatNoir Posted March 9, 2022 Share Posted March 9, 2022 11 minutes ago, NostyBoy said: Would it be a simple case of replacing the RAM and restarting my array? That would be the first step. You will still have to address the corruption that already occurred. Quote Link to comment
JorgeB Posted March 9, 2022 Share Posted March 9, 2022 After you fix the RAM issue run a scrub on the pools, any corrupt files will be listed in the syslog, delete those or replace them from backups. Quote Link to comment
NostyBoy Posted March 13, 2022 Author Share Posted March 13, 2022 Hi guys, New RAM fitted and everything is fully functioning again. Thanks for the help! Quote Link to comment
ChatNoir Posted March 13, 2022 Share Posted March 13, 2022 7 hours ago, NostyBoy said: New RAM fitted and everything is fully functioning again. Did you On 3/9/2022 at 11:08 AM, JorgeB said: After you fix the RAM issue run a scrub on the pools, any corrupt files will be listed in the syslog, delete those or replace them from backups. Quote Link to comment
NostyBoy Posted March 13, 2022 Author Share Posted March 13, 2022 I’m going to go ahead and say no to this… is there an idiots guide I can follow to running a scrub? Quote Link to comment
ChatNoir Posted March 13, 2022 Share Posted March 13, 2022 1 hour ago, NostyBoy said: I’m going to go ahead and say no to this… is there an idiots guide I can follow to running a scrub? Click on the first drive of your Pool. Scroll to the Scrub section. Hit the big orange Scrub button. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.