KTFirst Posted April 26, 2022 Share Posted April 26, 2022 Hi. I have a Epyc, 128GB RAM, Supermicro MB with 10Gbit LAN, running 10Gbit... and running Ironwolf PROs 18TBs disks (five in array, no cache), no other items or VMs (Krusader docker). I am copying from a high end RAID5 NAS to the UnRaid server (using Krusader, mounted the RAID5 NAS into Unraid). I get transfer speeds constantly of about 250Mbps... I understand Unraid is not raid. But this seems a slow to me. Tips would really be appreciated. Quote Link to comment
JorgeB Posted April 27, 2022 Share Posted April 27, 2022 Do you mean 250Mb/s or 250MB/s? If the former try turbo write, for the latter it's about the expected speed, Unraid can never be faster than single disk write speed when writing to the array. Quote Link to comment
KTFirst Posted April 27, 2022 Author Share Posted April 27, 2022 Hi. The way I ”measure” is on dashboard it says inbound for the NIC. It states ”361.0 Mbps” for ex. So assumed it is bit. Quote Link to comment
Solution JorgeB Posted April 27, 2022 Solution Share Posted April 27, 2022 1 hour ago, JorgeB said: try turbo write, Quote Link to comment
KTFirst Posted April 27, 2022 Author Share Posted April 27, 2022 Read up on that. Two things, can you enable turbo write for a while (e.g. during large transfers) then disable it? (obviously wo having to redo all stuff)...? Quote Link to comment
Squid Posted April 27, 2022 Share Posted April 27, 2022 Yes. You can flip back and forth as much as you want. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.