Parzival_AR Posted June 8, 2022 Share Posted June 8, 2022 Hi Guys, Last few days has been a nightmare. After I moved my server (from one part of the room, to another, just a few meters), the issue begins. My problem is at random moment the server is totally unresponsive, not even a ping or ssh works. The only way to get it back is hard reset. I check everything I can think of, Cables, move back to version 6.9.2, shutdown non essential software, etc I'm getting out of ideas. Please can anyone check the logs to see if you see something? thanks and best regards from Buenos Aires! hal9000-diagnostics-20220608-0740.zip Quote Link to comment
sleanzles Posted June 9, 2022 Share Posted June 9, 2022 (edited) I have similar issue too these last few days can't complete a parity check without freezing the system... Atm trying safe mode to see if I can complete my 2 days parity check. My last resort is to rollback to 6.8.3 might be a solution as per other thread. Edited June 9, 2022 by sleanzles Quote Link to comment
MrGrey Posted June 9, 2022 Share Posted June 9, 2022 Probably no help, but it reminds me of moving my server... Long story short, the "plug/power" was a switched (controlled by the light switch) plug. Every time I left it to test, I, unknowingly, turned the lights and power off. I thought it was so random. Mr. Grey. Quote Link to comment
ChatNoir Posted June 9, 2022 Share Posted June 9, 2022 7 hours ago, Parzival_AR said: My problem is at random moment the server is totally unresponsive, not even a ping or ssh works. Did you check the power states as mentioned here : https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/#comment-819173 Your memory speed seem OK. If that does not solve the issue, you should set up a syslog server and post this file after the next crash. Quote Link to comment
JonathanM Posted June 9, 2022 Share Posted June 9, 2022 6 hours ago, MrGrey said: Probably no help, but it reminds me of moving my server... Long story short, the "plug/power" was a switched (controlled by the light switch) plug. Every time I left it to test, I, unknowingly, turned the lights and power off. I thought it was so random. Mr. Grey. Clark Griswold Quote Link to comment
Parzival_AR Posted June 11, 2022 Author Share Posted June 11, 2022 first of all, thanks guys for the ideas. I update the bios and reset it, but nothing has changed. It is very strange, I never had this problems before. attached is the logs if someone can see something hal9000-diagnostics-20220608-0740.zip syslog Quote Link to comment
Parzival_AR Posted June 14, 2022 Author Share Posted June 14, 2022 after a memtest without any error, today I test something new. I suspected that the issue may be network related, so today before work I started the machine and disconect it from the network. When I came back home, the server was working fine. The I plug in again to the network the issue happend. But I cannot identify what is doing this, but its for sure something related to networking Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.