12_purple_giraffes Posted August 13, 2022 Share Posted August 13, 2022 So i recently upgraded to 2.5 gigabit networking and have noticed my transfer speed when writing is only hitting around 130MB/s read is 210-230MB/s (To and from the SSD cache) When writing i have one core on the server at 90% or more then writing is this a problem. Server M/B: MSI X99A GAMING PRO CARBON CPU: Intel® Xeon® CPU E5-2630L v3 @ 1.80GHz Memory: 16 GiB DDR4 Storage: Cache: 2 x Crucial MX500 500GB Array: 6 x Seagate 8TB IronWolf NAS PC CPU: AMD 5800X M/B: Gigabyte Aorus x570 ultra Memory: 32 GiB DDR4 Storage: Samsung 970 Evo 500GB (OS) Samsung 950 Oro 256 GB (Doc) Sabrent Rocket Q 2tb (Steam) Quote Link to comment
trurl Posted August 13, 2022 Share Posted August 13, 2022 Are you absolutely sure you are writing to a cached user share? Quote Link to comment
JorgeB Posted August 14, 2022 Share Posted August 14, 2022 SMB is single threaded, for 10GbE I would expect a possible bottleneck, but that CPU should be enough for 2.5GbE, if you have an array disk still empty, and because disks are much faster in the outer sectors, enable turbo write and write directly to the array, it should be capable of 200MB/s+, just to check if if the pool is under performing. Quote Link to comment
12_purple_giraffes Posted August 14, 2022 Author Share Posted August 14, 2022 20 hours ago, trurl said: Are you absolutely sure you are writing to a cached user share? Yep using my "Network Share" that has a cache 5 hours ago, JorgeB said: SMB is single threaded, for 10GbE I would expect a possible bottleneck, but that CPU should be enough for 2.5GbE, if you have an array disk still empty, and because disks are much faster in the outer sectors, enable turbo write and write directly to the array, it should be capable of 200MB/s+, just to check if if the pool is under performing. If i understand correctly setting Tunable (md_write_method) to "reconstruct write" would be Turbo write but all the drives need to be spinning i spin down my drives after 1 hr as its mostly used as a plex server not shore that would work great for me. My drives have only 400 to 800GB per drive free using 8TB drives. Quote Link to comment
JorgeB Posted August 15, 2022 Share Posted August 15, 2022 16 hours ago, 12_purple_giraffes said: If i understand correctly setting Tunable (md_write_method) to "reconstruct write" would be Turbo write but all the drives need to be spinning i spin down my drives after 1 hr as its mostly used as a plex server not shore that would work great for me. It would be for testing only, you could then change it back, but if the drives are almost full it won't be a very good test, instead enable disk shares and transfer to cache using the disk share to see if there's any difference. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.