holo951225 Posted October 6, 2022 Share Posted October 6, 2022 please help i removed my rx 580 since it was not in used and now my sas card does not detect my sata drives even its listed on the devices on unraid. i try to readd my gpu but still all my drives undetected unraidgl-diagnostics-20221007-0451.zip Quote Link to comment
JorgeB Posted October 7, 2022 Share Posted October 7, 2022 Which model HBA? I'm seeing an LSI but no driver is being loaded. Quote Link to comment
Kilrah Posted October 7, 2022 Share Posted October 7, 2022 Did you have the GPU passed through to a VM? If so go into the VM settings and remove that, when you change hardware the IDs change and if not removed it can end up passing the HBA through to the VM. Quote Link to comment
holo951225 Posted October 8, 2022 Author Share Posted October 8, 2022 On 10/7/2022 at 4:11 PM, JorgeB said: Which model HBA? I'm seeing an LSI but no driver is being loaded. i am using sas 9207-8i my vm gpu is set to vnc Graphics Card: VNC VNC Video Driver: XL (best) Quote Link to comment
JorgeB Posted October 8, 2022 Share Posted October 8, 2022 1 minute ago, holo951225 said: i am using sas 9207-8i Then you might have a problem with the HBA, it's being detected in a weird way: 01:00.0 Mass storage controller [0180]: Broadcom / LSI 53c875J [1000:008f] (rev 05) Subsystem: Broadcom / LSI 53c875J [1000:008f] Typical 9207-8i looks like this: 01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05) Subsystem: Broadcom / LSI 9207-8i SAS2.1 HBA [1000:3020] And I think that's why no driver is being loaded, it's being detected with a weird model and with a different vendor:device ID, try it in a different slot/PC if available to see it makes a difference, you can also try re-flashing the firmware. Quote Link to comment
SimonF Posted October 8, 2022 Share Posted October 8, 2022 4 minutes ago, holo951225 said: i am using sas 9207-8i my vm gpu is set to vnc Graphics Card: VNC VNC Video Driver: XL (best) what cards are bound to vfio. as you removed a card if you didnt remove vfio first it it may be picking up the sata card. Quote Link to comment
holo951225 Posted October 10, 2022 Author Share Posted October 10, 2022 ill try on my other mobo when i get back. hope its not the hba problem. before that it works fine just removed the gpu sudden issues appear. no card were bound when i removed it @SimonF Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.