Lucascoco Posted October 10, 2022 Share Posted October 10, 2022 Hallo, ich habe von 3 VM das Backup extrahiert vom vma format ins raw format. Umbenannt in .img 1 VM startet, die anderen beiden leider nicht. HomeAssisten startet.... IoBroker und eine Debian installation leider nicht, was kann ich noch prüfen ? Quote Link to comment
cz13 Posted October 10, 2022 Share Posted October 10, 2022 (edited) Hast du in den Einstellungen der VM bei „Machine“ schon zwischen Q35 und i440 gewechselt. Meine Debian VM habe ich damals vom ESX exportiert und diese startet z.B. mit Q35 5.1 Edited October 10, 2022 by cz13 Quote Link to comment
mgutt Posted October 10, 2022 Share Posted October 10, 2022 Bevor man solche Experimente macht, würde ich dir auch dazu raten noch mal Backups zu erstellen. 1 hour ago, Lucascoco said: vma format ins raw format Dh diese VMs sind bisher nicht in unRAID gelaufen oder warum dieser Schritt? Was genau läuft eigentlich nicht? Quote Link to comment
Lucascoco Posted October 10, 2022 Author Share Posted October 10, 2022 (edited) Ich konnte vorher nicht testen, da ich die selbe Hardware verwenden musste, Backup ist vorhanden. es kommt nur ein vnc Fenster mit einer Shell. Leider hat Q35 5.1 auch nichts gebracht. Siehe Anhang Edited October 10, 2022 by Lucascoco Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 @Lucascocowas hast du bei bios ausgewählt? Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 Da ging nur ovmf oder mit tpm seabios war ausgegrätet. Quote Link to comment
mgutt Posted October 11, 2022 Share Posted October 11, 2022 2 hours ago, Lucascoco said: Da ging nur ovmf oder mit tpm seabios war ausgegrätet. Du musst die VMs immer neu anlegen. Änderungen sind nicht möglich. Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 (edited) Jetzt starten die VM, bekommen aber keine IP über den DHCP Server.... Edited October 11, 2022 by Lucascoco Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 Bei meiner Debian VM musste ich damals die netzwerkkarte anpassen. schau mit ifconfig nach Vergleich das Mal mit dem Inhalt von /etc/network/interfaces Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 so sieht es aus Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 (edited) Ok. Wenn du „ifconfig“ oder „ip a“ im Terminal eingibst, gibt esda auch eine „ens18“ ? Edited October 11, 2022 by cz13 Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 nein, wie bekomme ich meine richtige Netzwerkkarte raus ? Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 Zeig mal die Ausgabe vom Befehl „ip a“ Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 Da fehlt, so wie es aussieht die Netzwerkkarte. Was hast du in Unraid in der VM bei „Network Model“ bzw. bringt eine Änderung hier eine andere Ausgabe bei ip a? Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 virtio-net habe ich drin stehen und steht auf down Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 wie bekomme ich den adapter on? Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 4 minutes ago, Lucascoco said: steht auf down ? Kannst du mal einen Screenshot machen? Am besten auch mit Network Source drauf. Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 siehe oben Quote Link to comment
Solution cz13 Posted October 11, 2022 Solution Share Posted October 11, 2022 ändere in /etc/network/interfaces den ens18 auf enp1s0 und reboote die vm 1 Quote Link to comment
Lucascoco Posted October 11, 2022 Author Share Posted October 11, 2022 Super das war es, Danke Dir Quote Link to comment
cz13 Posted October 11, 2022 Share Posted October 11, 2022 Gerne, markier den Thread dann bitte noch als gelöst und viel Spaß weiterhin mit Unraid. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.