PsychoAndrew Posted October 18, 2022 Share Posted October 18, 2022 Hello Unraid Family, I currently have a Pro License on an R720xd (24 2.5" drives) and have recently been given a 730xd (12 3.5" drives). I've seen Space Invader's video on Migrating from one server to another, but that only allows for using the same hard drives. Is it possible to transfer the pro license and go from 2.5" drives to 3.5" drives? Any help is appreciated. Quote Link to comment
DivideBy0 Posted October 18, 2022 Share Posted October 18, 2022 Just move the USB drive to the new server, boot up and you're good to go. License is locked with the USB drive and not the server Quote Link to comment
BillR Posted October 18, 2022 Share Posted October 18, 2022 Will you be migrating data off your old drives or just starting from scratch? Either way, Unraid is surprisingly tolerant of moving to new hardware. You can add new drives and migrate the data, or just delete your array and start all over again. I would suggest backing up your USB drive first - on the main screen, click on the flash drive and then click on the "flash backup" button, in case you want to roll back. But other than that, as John said, just boot on the USB drive - the license is tied to the USB drive alone, not any of the other hardware (drives, motherboard, cpu). So unless you wanted to move your license to a new USB key (instructions on the wiki for that), you don't need to do anything special. Quote Link to comment
PsychoAndrew Posted October 18, 2022 Author Share Posted October 18, 2022 That's the problem, I need to move data from old server (2.5" drives) to new server (3.5" drives). I understand just moving the usb with license, but if i take the license out of the old server and put in new server, then how do i transfer the data? I think I will be forced to buy a new license for the new server and just transfer the files. That's a waste of $$ that I don't have, but can't think of another way. Quote Link to comment
JorgeB Posted October 18, 2022 Share Posted October 18, 2022 Use a new flash drive with a trial license for the new server, once the transfer is done start using the old flash drive, you can copy the /config folder to keep all settings. Quote Link to comment
PsychoAndrew Posted October 18, 2022 Author Share Posted October 18, 2022 will that work even if going from x24 2.5" drives (old server) to x12 3.5" drives (new server)? Quote Link to comment
Solution itimpi Posted October 18, 2022 Solution Share Posted October 18, 2022 You copy the /config folder from the ‘trial’ flash drive back to the old one (omitting the trial .key file) to transfer settings to it and then boot the new server off the old (licensed) flash drive. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.