November 28, 20223 yr Hi, i ran out of SATA slots. I do have 1 parity drive 14tb wd red plus, 1tb ssd samsung pro, 3x14tb wdredplus, 2x10tb and 1x6tb. I want to replace the 2x10tb and 1x6tb drives for brand new 14tb drives. Whats the best option to start with? Can i remove in the time of not using dockers and vms the cache drive, to have at least one sata slot free, to start preclear and then rebuild after removed one of the drives? Or what should i do? Someone could give me a short advice. Thanks
November 30, 20223 yr If all your current drives are perfectly healthy and your parity checks have had zero errors, I'd do one last parity check and start replacing / rebuilding the drives one at a time with a parity check after each rebuild.
November 30, 20223 yr Community Expert https://wiki.unraid.net/Manual/Storage_Management#Replacing_a_disk_to_increase_capacity
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.