outwar6010 Posted December 18, 2022 Share Posted December 18, 2022 What can be causing this? I'm connected over ethernet Quote Link to comment
trurl Posted December 18, 2022 Share Posted December 18, 2022 attach diagnostics to your next post in this thread Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 sorry about that quantumserver-diagnostics-20221218-0127.zip Quote Link to comment
trurl Posted December 18, 2022 Share Posted December 18, 2022 Your cache drive is completely full, corrupting docker.img. Not a good idea to overfill btrfs filesystem. Best to not cache anything for the initial data load. It is impossible to move from fast cache to slow array as fast as you can write to fast cache, so making mover run more often also will not help. One way to speed up initial load is to not install parity until you have completed initial load. Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 how do i fix this? force mover to empty the drive remove the cache and continue the initial load? will that fix everything? Quote Link to comment
itimpi Posted December 18, 2022 Share Posted December 18, 2022 4 hours ago, outwar6010 said: how do i fix this? force mover to empty the drive remove the cache and continue the initial load? will that fix everything? Running mover will result in any shares that have Use Cache=Yes setting having any content they have on the cache/pool transferred to the array. You should also ensure you have set the Minimum Fred Space value for any pool to something that suits your usage to help with avoiding overfilling the pools/cache. That will mean that new files will start bypassing the cache/pool when that limit has been reached. Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 I set the minimum free space to 200gb on the cache and hit mover last night but the cache is still full. IS there anyway a unraid staff to remote in and fix the settings for me? Quote Link to comment
JorgeB Posted December 18, 2022 Share Posted December 18, 2022 Enable the mover logging, run the mover, post new diags. Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 https://ibb.co/9Y2Qtqq I'll try that but would a setting here be a problem? I don't have any exp with unraid or stuff like this and followed a youtube video for the install Quote Link to comment
JorgeB Posted December 18, 2022 Share Posted December 18, 2022 Settings depend on where you want the data in those shares to end up after the mover runs, cache=prefer will stay on cache, cache=yes will be moved to the array, if they are not in use, don't already exist on the array, etc, mover log will show the problem. Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 I enabled mover logging but can't seem to find a file in the diagnostics logging moving data quantumserver-diagnostics-20221218-1418.zip Quote Link to comment
itimpi Posted December 18, 2022 Share Posted December 18, 2022 The mover logging is sent to the syslog file (which is in the 'logs' section of the diagnostics. Quote Link to comment
outwar6010 Posted December 18, 2022 Author Share Posted December 18, 2022 oh ok. Hopefully the files above help solve this Quote Link to comment
trurl Posted December 19, 2022 Share Posted December 19, 2022 Mover log says read-only filesystem. You have probably corrupted cache by filling it. Check filesystem on cache. Quote Link to comment
outwar6010 Posted December 19, 2022 Author Share Posted December 19, 2022 no errors found how do I fix this? Quote Link to comment
trurl Posted December 19, 2022 Share Posted December 19, 2022 1 hour ago, outwar6010 said: no errors found how do I fix this? You should always capture the output from check filesystem so you can post it. Quote Link to comment
outwar6010 Posted December 19, 2022 Author Share Posted December 19, 2022 After doing the repair with no errors etc. I decided to back everything on the cache drive and then I messed up. I tried to change the file system to xfs thinking that would help but now the drive says Unmountable: Wrong or no file system . Quote Link to comment
outwar6010 Posted December 19, 2022 Author Share Posted December 19, 2022 (edited) I formatted the drive and now everything seems to be normal. I then removed it from the pool and will add it later once the initial fill is done. Does this all sound right? Edited December 19, 2022 by outwar6010 Quote Link to comment
Solution trurl Posted December 19, 2022 Solution Share Posted December 19, 2022 You will also want to wait until you have cache to enable Docker and/or VM Manager. You want appdata, domains, system shares on cache or other fast pool so Docker/VM performance isn't impacted by slower array, and so array disks can spin down since these files are always open. Quote Link to comment
outwar6010 Posted December 19, 2022 Author Share Posted December 19, 2022 Thanks for all your help. I'll see you guys in like 6 days after I've transferred all my data xd Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.