RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 1 minute ago, trurl said: post new diagnostics homeserver-diagnostics-20230129-1806.zip Quote Link to comment
itimpi Posted January 30, 2023 Share Posted January 30, 2023 Probably the best way to check the health of the drive is to run an Extended SMART test. That is internal to the drive and thus not affected by SATA cabling issues (although bad power could cause it to fail). Quote Link to comment
RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 1 minute ago, itimpi said: Probably the best way to check the health of the drive is to run an Extended SMART test. That is internal to the drive and thus not affected by SATA cabling issues (although bad power could cause it to fail). Extended Smart self test wont run. When you click start it doesnt do anything. Nothing in logs. Quote Link to comment
RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 29 minutes ago, RedZephon said: Extended Smart self test wont run. When you click start it doesnt do anything. Nothing in logs. When I reboot the server, the drive has a green circle. I can run a smart test and it says completed without error. Formatting still fails. Quote Link to comment
trurl Posted January 30, 2023 Share Posted January 30, 2023 SMART report says no self-tests have been run Could be a bad disk, certainly lots of syslog entries about it. You could try to put it in another machine and run manufacturer's tests on it. Quote Link to comment
RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 homeserver-diagnostics-20230129-1911.zipThe smart test was done after the last diagnostics. Here are the diagnostics post successful smart test. Quote Link to comment
trurl Posted January 30, 2023 Share Posted January 30, 2023 Passed Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 299 - Quote Link to comment
trurl Posted January 30, 2023 Share Posted January 30, 2023 Can you connect it to a different port? Quote Link to comment
RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 I swapped the cable and the port and it came back no problem, but still doesnt let me assign it as parity and gets kicked back to unassigned devices. Quote Link to comment
RedZephon Posted January 30, 2023 Author Share Posted January 30, 2023 And now the drive won't give me the green circle no matter what, even after reboots. Quote Link to comment
trurl Posted January 30, 2023 Share Posted January 30, 2023 Wonder if this isn't UUID problem, but didn't see that in earlier diagnostics. Post new diagnostics Quote Link to comment
trurl Posted January 30, 2023 Share Posted January 30, 2023 Try booting in SAFE mode just to make sure some plugin isn't to blame Quote Link to comment
RedZephon Posted August 11, 2023 Author Share Posted August 11, 2023 I don't want to necro this, but I want to post my solution to those that may be having a problem similar and are searching via google or something My solution was to buy a more powerful power supply since my drives and graphics card were drawing too much power for my power supply to handle and were getting disconnected. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.