Upgrade 6.11.5 to 6.12.1 and now no Web GUI

[GigaTech]

Hi Guys/Gals

 

I have just done an OS update to 6.12.1, reboot as requested

 

No there is no web GUI, can ping the IP from workstation

UNRAID boot with GUI = No web GUI (even local in firefox)

UNRAID safe mode boot with GUI = No web GUI (even local in firefox)

 

in all cases, I can ping the IP address of the server and dont see any obvious errors on boot

 

 

All plugin, docker and VM update were done before the OS update

 

Daigs attached (produced from console)

 

Thanks

gigaraid1-diagnostics-20230623-1841.zip

Edited June 23, 2023 by GigaTech

[JorgeB]

DESCRIPTION[0,3]="vlanGigaTech"
VLANID[0,3]="77"
PROTOCOL[0,3]="ipv4"
USE_DHCP[0,3]="no"
IPADDR[0,3]="192.168.77.11"

 

This VLAN has the same IP as your main bond, I know you cannot have that with two NICs/bonds, not sure about VLANs, try changing that.

[GigaTech]

Thanks for the reply.

 

How, from the console?

you need to babysit me, i'm a windows boy!

 

Thanks

 

EDIT:

Got it

  - Boot with GUI

  - Midnight commander

  - Edit this file /boot/config/network.cfg

  - Comment out the vLAN 77

  - Save and reboot

  - access to the GUI, IP address 192.168.77.11

 

 

Edited June 23, 2023 by GigaTech

[GigaTech]

but this does beg the question

 

It has been working like this forever, until the upgrade to 6.12.1

 

Thanks for your help

[bonienl]

2 minutes ago, GigaTech said:

but this does beg the question

 

Unraid 6.12 has improvement security, as part of this services are restricted to valid interfaces.

Your invalid configuration of the past is now simply not allowed anymore.

 

[cptcobalt]

Gosh—I have been bashing my head against the no gui problem for the last two hours, and this was my cause. I changed my VLAN configuration and my webui started working after a reboot. I wish this was an actual emitted error in a log file somewhere!

[bonienl]

Install "Fix Common Problems" and it will tell you.

 

[GigaTech]

"Fix Common Problems" has always been installed on all of my servers (pre upgrade to 6.12 and fully updated) and it didn't tell me, I know this for a fact. I ran it and checked BEFORE doing the update...

 

if "Unraid 6.12 has improvement security" then it needs improvements in reporting/logging too, rather than silently failing and breaking the whole system giving no user information