mantichora Posted December 8, 2023 Share Posted December 8, 2023 Hi all - This is really puzzling me. My freshly installed server's actual static IP differs from what is configured in the GUI under Settings/Network Settings for interface eth0. After installing, I could not reach the server, so I logged in as root on the local console. Here I saw (issue) that the server was actually running .13 while I had configured .15 in the GUI. You will see the same thing in the diagnostic data attached: The static IP in system/ifconfig.txt differs from the one in config/network.cfg. So obviously, the server is only reachable under .13 for now, despite what is configured in the GUI. How can this even happen? I assumed the GUI network settings will overwrite whatever is configured in Linux underneath? And more importantly: How can I fix this without breaking any of the generated settings? shuttle-diagnostics-20231208-0636.zip Quote Link to comment
JorgeB Posted December 8, 2023 Share Posted December 8, 2023 This is very strange, probably not the issue, but since I've never seen that before try setting the NIC to .15, not .015 as it is. 1 Quote Link to comment
Solution itimpi Posted December 8, 2023 Solution Share Posted December 8, 2023 4 minutes ago, JorgeB said: This is very strange, probably not the issue, but since I've never seen that before try setting the NIC to .15, not .015 as it is. The 015 would explain it as the leading 0 means it is treated as octal number and 015 in octal is 13 in decimal 1 1 Quote Link to comment
mantichora Posted December 8, 2023 Author Share Posted December 8, 2023 4 hours ago, itimpi said: The 015 would explain it as the leading 0 means it is treated as octal number and 015 in octal is 13 in decimal That's it, THAT'S IT. Removing the leading zero brings all back to normal. Just by some old habit, I've been using a leading 0 as a lot of broken UIs require you to enter 3 digits, so I don't even think about anymore. You have some serious troubleshooting moves going on there! 1 Quote Link to comment
ljm42 Posted February 13 Share Posted February 13 Thanks for reporting! Unraid 6.12.7-rc2 will strip leading zeros from IP addresses to prevent other folks from running into this: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.