Badboy Posted April 1 Share Posted April 1 Hi, I have the following : Parity is 18tb Disk 1 16tb Disk 2 18tb Disk 3 10tb Disk 4 16tb I was starting to get low on space, so I activated one of my old 10tb drives. It was sitting there doing nothing and it still worked. My disks are mirrored so obviously whatever I add I lose half. It wiped the disk, and then I formatted it, and it added it to the pool. The problem is, it added the full 10tb, it should have only added 5tb. It's also not showing a file system for the disk I added. I'm assuming with the new changes to Unraid I must have done something wrong? Never had this problem before. Another question, how many disks should you have before using a second parity disk? I was going to setup a second set of disks for backups, but I just have too much data. I'm just going to have to take my chances. I try not to let my disks get too old. Any help is appreciated. Quote Link to comment
JorgeB Posted April 1 Share Posted April 1 3 minutes ago, Badboy said: My disks are mirrored so obviously whatever I add I lose half. Not sure what you mean, parity doesn't work with mirrors, every disk you add will use the full capacity. Quote Link to comment
Badboy Posted April 1 Author Share Posted April 1 Sorry, mirrored was the wrong word. They are in raid mode. Each one only uses half its capacity. Up unit this last one added. Didn't add it that way. Quote Link to comment
JorgeB Posted April 1 Share Posted April 1 10 minutes ago, Badboy said: Each one only uses half its capacity Still don't understand what you mean, each array device uses the full capacity of the drive as an independent filesystem, please post the diagnostics and identify which drive you think is the problem. Quote Link to comment
Badboy Posted April 1 Author Share Posted April 1 The pool is set in raid mode. If I add 50tb of space, I'm only going to have 25tb available. That is the way mine is working. Up until now, when I added 10tb and it gave me the whole thing. I only had 5tb left, it should have been 10tb when I added the disk., but it's showing 15tb. Can't post anything at the moment. Quote Link to comment
Badboy Posted April 1 Author Share Posted April 1 Disk #5 is showing all it's space is available, when only half of it should be. Quote Link to comment
JorgeB Posted April 1 Share Posted April 1 1 hour ago, Badboy said: Disk #5 is showing all it's space is available, when only half of it should be. And that is correct, a new added array disk will always have its full capacity available. Quote Link to comment
itimpi Posted April 1 Share Posted April 1 4 hours ago, Badboy said: The pool is set in raid mode. If I add 50tb of space, I'm only going to have 25tb available. That is the way mine is working. Up until now, when I added 10tb and it gave me the whole thing. I only had 5tb left, it should have been 10tb when I added the disk., but it's showing 15tb. Can't post anything at the moment. All the screen shots you posted refer to the main Unraid array - not to a pool and the main array only uses the Unraid proprietary variant of RAID. In the main Unraid array the available space is the sum of the data drives. Quote Link to comment
Badboy Posted April 1 Author Share Posted April 1 1 hour ago, JorgeB said: And that is correct, a new added array disk will always have its full capacity available. Stupid me I guess, never noticed the array was using the full amounts. How many disks should you have before considering a second parity drive? Thanks. Quote Link to comment
JonathanM Posted April 1 Share Posted April 1 1 hour ago, Badboy said: How many disks should you have before considering a second parity drive? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.