Argusius Posted April 28 Share Posted April 28 (edited) I've recently moved to a new home and with that I got a new netgear modem/router combo. Recently, after most of the move had shook out, I attempted to setup my ole reliable unraid server. Unfortunately, I was unable to connect to it. I had forgot I had set a static IP for it in the unraid gui. After reading some things online I saw that many people had success with deleting the network config file, so I did this but to no success. I'm curious where to move forward from here. Facts: 1. Router sees the unraid server and assigns it an IP. 2. Attempt to assign static ip via the router doesn't change the fact that I cannot access the gui. 3. Attempting to connect via ip is unsuccessful (https and http) 4. I can ping the unraid server all day. Edited April 28 by Argusius Quote Link to comment
Frank1940 Posted April 28 Share Posted April 28 Hook up a monitor and Keyboard to your server. When the Server is booting, you will see a boot menu. Choose the "unRAID OS GUI Mode". It should boot up with the normal GUI on the attached monitor. You can now change from a Static IP address to get an IP address from the router's DCHP process . Reboot the server. Quote Link to comment
Argusius Posted April 28 Author Share Posted April 28 9 hours ago, Frank1940 said: Hook up a monitor and Keyboard to your server. When the Server is booting, you will see a boot menu. Choose the "unRAID OS GUI Mode". It should boot up with the normal GUI on the attached monitor. You can now change from a Static IP address to get an IP address from the router's DCHP process . Reboot the server. I tried that, but when i attempt to do so the screen hangs with a blinking _ in the top left. Quote Link to comment
Argusius Posted April 28 Author Share Posted April 28 Okay. I'm going to add a few things to this. I last attempted to edit the network.cfg and re-add that to the usb. Still unable to connect. Quote Link to comment
Veah Posted April 28 Share Posted April 28 did you access using name initial setup name? http://tower I believe. Quote Link to comment
itimpi Posted April 28 Share Posted April 28 7 hours ago, Argusius said: I tried that, but when i attempt to do so the screen hangs with a blinking _ in the top left. If you boot in non-gui mode do you get a login prompt? If so you could try logging in and issuing the 'diagnostics' command which will write the diagnostics zip file to the logs folder on the flash drive which you could then post here to see if we can spot anything. Quote Link to comment
Gragorg Posted April 28 Share Posted April 28 Does your unraid server use a static ip or DCHP? If you use static is possible the new router has already assigned the ip your server used if you have not reserved it. If you look in attached device on your router is the IP only assigned once? Quote Link to comment
Argusius Posted April 29 Author Share Posted April 29 Having issues getting it to actually write a diagnostic fail. See picture. I'll post the last diagnostic and I'll attempt again. tower-diagnostics-20240111-0235.zip Quote Link to comment
itimpi Posted April 29 Share Posted April 29 The screenshot shows that you are having a problem with the flash drive (/boot is where it is mounted). Quote Link to comment
Argusius Posted April 29 Author Share Posted April 29 (edited) You suppose the flash drive is corrupted then? Edited April 29 by Argusius Quote Link to comment
itimpi Posted April 29 Share Posted April 29 1 minute ago, Argusius said: You supposed the flash drive is corrupted then? No idea - just that you were getting an input/output error. It could be the flash drive starting to fail or that it has dropped offline for some reason. It would do no harm to plug it into a PC/Mac and check that you can read and write to it successfully. Quote Link to comment
Argusius Posted April 29 Author Share Posted April 29 1 minute ago, itimpi said: No idea - just that you were getting an input/output error. It could be the flash drive starting to fail or that it has dropped offline for some reason. It would do no harm to plug it into a PC/Mac and check that you can read and write to it successfully. I've been able to read/write to it without issue on both my Mint and Windows computers. Quote Link to comment
Solution Argusius Posted April 29 Author Solution Share Posted April 29 (edited) Alright, after a weeks of frustration I just wiped the USB and reinstalled unraid onto it while loading some key config files I wanted and using Appdata Backup. Case closed. I appreciate everyone's assistance in this matter. Edited April 29 by Argusius Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.