Golfonauta Posted June 7, 2015 Share Posted June 7, 2015 Hello, I've upgraded from V5 to V6rc4 I've created the docker image and enabled it in the /docker page I can insert a list of template repositories and save I tried with this list: https://github.com/aptalca/docker-templates https://github.com/balloob/unraid-docker-templates https://github.com/binhex/docker-templates https://github.com/jshridha/templates https://github.com/CaptInsano/docker-containers/tree/templates https://github.com/coppit/docker-templates https://github.com/dmaxwell351/docker-containers/tree/templates https://github.com/gfjardim/docker-containers/tree/templates but then I had near to no changes when I try to add a container in the select a template only [user defined templates]and [default templates] was shown until after trying lots of times and deleting creat image... etc now I can read also: [template-user] and inside my-plex but only this being also unable to install it Is there any video or troubleshooting guide? I have seen some info but from older versions of unraid and big differencies in the docker page Thanks Link to comment
Squid Posted June 7, 2015 Share Posted June 7, 2015 This post: http://lime-technology.com/forum/index.php?topic=37958.0 has a couple of good links in the OP for getting started (in particular, the Noobie Docker Setup Guide) Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 yes, I saw them from Noobie Docker Setup Guide http://lime-technology.com/forum/index.php?topic=37732.0 while the unraid pages aren't exactly the same, I followed the step by step guide, then on step 6 when I press select a template I don't see that menu, only the few option in the attached png. I know I don't have experience, but I follow step by step guides, I don't bypass any step or think I'm cool and I can do it without reading... all my drives are reiserfs if this makes any difference Thanks Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 well, it is not nicely explained, but if this issue is because I use a cache drive in reiserfs and not btrfs, please tell me how to change the cache drive from one format to the other (without losing data) Thanks Link to comment
Squid Posted June 7, 2015 Share Posted June 7, 2015 well, it is not nicely explained, but if this issue is because I use a cache drive in reiserfs and not btrfs, please tell me how to change the cache drive from one format to the other (without losing data) Thanks Since you're on RC4 it doesn't matter what format the cache drive is in. Docker creates an image file (something akin to an ISO) on the cache drive in BTRFS format. Did you create an image file? Did you create a cache-only share named something like app-data? Did you save those repositories when you entered them? (TBH, it would probably be easier to forget about the concept of repositories altogether and install this plugin: http://lime-technology.com/forum/index.php?topic=40262.0 to let you use docker applications more akin to something like an app-store. Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 I created the img, didn't create any cache share. How could I create only this user share? I don't want to create multiple shared folders, I based my unraid in sharing the drives only as I want to have only the drive in use spinned up for a low noise/greener setup. I pressed save. Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 when trying to install the pluggin said I get: plugin: installing: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg plugin: downloading https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg plugin: downloading: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg ... done Warning: simplexml_load_file(): /tmp/plugins/community.applications.plg:1: parser error : Document is empty in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 Warning: simplexml_load_file(): in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 Warning: simplexml_load_file(): ^ in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 Warning: simplexml_load_file(): /tmp/plugins/community.applications.plg:1: parser error : Start tag expected, '<' not found in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 Warning: simplexml_load_file(): in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 Warning: simplexml_load_file(): ^ in /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin on line 193 plugin: xml parse error Link to comment
trurl Posted June 7, 2015 Share Posted June 7, 2015 How did you install the plugin? Did you do it from the Install Plugin page or did you try to install it the old way? I suspect a corrupt flash. That would perhaps explain this problem with installing the plugin, and also the problem with installing repositories. Put your flash in your PC and let it checkdisk. Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 I installed the new V6 by backing up the old, format, copy all new V6, run the boot script (I needed to modify it to work) and then I copied back the settings. I've never used plugins in any of my older installs. I can ssh the unraid server and try any command you want to check if the FS is fine... thanks Link to comment
trurl Posted June 7, 2015 Share Posted June 7, 2015 Go to Tools - Diagnostics and attach the zip Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 diagnostics zip attached I used plugins page to install, don't know old way tower-diagnostics-20150607-1638.zip Link to comment
trurl Posted June 7, 2015 Share Posted June 7, 2015 Don't see anything about flash problems in your syslog. Can you ping github.com from your server? Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 OMG, you are right, a bad network setting due to a network device in repair now... thanks for your help, I'm going to test it and replay as soon as I check it's working, at least the plugin seems to be installed. Link to comment
Golfonauta Posted June 7, 2015 Author Share Posted June 7, 2015 It's working, I've been able to install plex docker. Thanks you both guys for your help. Sorry for my stupid issue. Thanks Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.