xxredxpandaxx Posted February 13, 2017 Share Posted February 13, 2017 One of my disks says its disabled. I ran a short self self-test on it and it came back with no errors, so I'm not sure what is wrong. Quote Link to comment
JorgeB Posted February 13, 2017 Share Posted February 13, 2017 Before rebooting go to Tools -> Diagnostics and post zip. Quote Link to comment
xxredxpandaxx Posted February 13, 2017 Author Share Posted February 13, 2017 Before rebooting go to Tools -> Diagnostics and post zip. Here you go. I marked the drive that is giving me problems. Edit: haha I copied the link and never posted it! https://dl.dropboxusercontent.com/u/1548652/Forums/unRAID/maple1-diagnostics-20170213-1139.zip Quote Link to comment
trurl Posted February 13, 2017 Share Posted February 13, 2017 Before rebooting go to Tools -> Diagnostics and post zip. Here you go. I marked the drive that is giving me problems. Looks like you forgot something. Quote Link to comment
xxredxpandaxx Posted February 13, 2017 Author Share Posted February 13, 2017 Before rebooting go to Tools -> Diagnostics and post zip. Here you go. I marked the drive that is giving me problems. Looks like you forgot something. Fixed it! Quote Link to comment
JorgeB Posted February 13, 2017 Share Posted February 13, 2017 Unfortunately you already rebooted after the disk3 got disable, so we can't see what happen, disk was online at reboot time but there's no SMART report for it, so looks like it dropped offline. Also, you should run an extended test on Disk9, it shows 2 pending sectors, and they look recent: Device Model: WDC WD30EZRX-00MMMB0 Serial Number: WD-WCAWZ2098155 9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 23746 197 Current_Pending_Sector 0x0032 200 198 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0030 200 198 000 Old_age Offline - 2 Error 4 occurred at disk power-on lifetime: 23500 hours (979 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 f8 09 ac e7 Error: UNC at LBA = 0x07ac09f8 = 128715256 Quote Link to comment
xxredxpandaxx Posted February 13, 2017 Author Share Posted February 13, 2017 Oh I thought you were talking about before I restart after the smart test. I had powered the array off to check the connections before I realized that the disk was getting detected. Also I know about disk 9. I was going to remove it and then this happened with disk 3 so I have to wait and replace it first I guess. Thanks for the help though. Quote Link to comment
JorgeB Posted February 13, 2017 Share Posted February 13, 2017 Disk3 dropping offline while unused is not a good sign, reboot again and get a SMART report. Quote Link to comment
xxredxpandaxx Posted February 14, 2017 Author Share Posted February 14, 2017 Disk3 dropping offline while unused is not a good sign, reboot again and get a SMART report. I did that and still no errors. I have a new disk coming tomorrow so I will replace it and then see if I can find anything out when its not in the array. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.