Abula Posted March 22, 2017 Share Posted March 22, 2017 Hi, I been really happy with unraid, so much that im planning a new build, in the past i used IBM 1015 because they were cheap and easy to flash, never i had an issue with it. But i would like to consider other hba on this new build, specially better performers that are supported by unraid out of the box. Im open to 8/16/24 HBAs, i dont have a budget set for them. Thanks for any suggestions, Link to comment
Fireball3 Posted March 22, 2017 Share Posted March 22, 2017 Unless your new build is not running with SSD's as array drives, there is no need to look for something more powerful than the SAS2008 based cards. The bottle neck will still be the spinners. But if you insist, there are SAS3008 based cards out there but we have little experience collected so far. I don't know if Limetech has already build in drivers for specific cards that they consider to be preferred to go with in future - I doubt. Link to comment
JorgeB Posted March 22, 2017 Share Posted March 22, 2017 SAS2308 based controllers are supported, e.g., LSI 9207-8i, but like Fireball3 mentioned,unless you're using SSDs or an expander with many HDDs (and your board supports PCIe 3.0) the SAS2008 has more than enough bandwidth. Link to comment
BobPhoenix Posted March 23, 2017 Share Posted March 23, 2017 I like the LSI 9201-16i as it has 16 ports and works without flashing in unRAID. It is SAS2116 based so no increase in performance over SAS2008 (that I know of) just more ports. Link to comment
Carpesimia Posted January 6, 2018 Share Posted January 6, 2018 Sorry for so many questions, I know nothing about HBAs. I'm looking at this for about $50: HP 660088-001 H220 2-Port SAS 6G PCI-E HBA SAS9205-8i I'll be able to just plug and play with something like that? Or do I need one that has enough "ports" on it as I have total drive bays, if I want to expand later? Link to comment
StevenD Posted January 6, 2018 Share Posted January 6, 2018 7 minutes ago, Carpesimia said: Sorry for so many questions, I know nothing about HBAs. I'm looking at this for about $50: HP 660088-001 H220 2-Port SAS 6G PCI-E HBA SAS9205-8i I'll be able to just plug and play with something like that? Or do I need one that has enough "ports" on it as I have total drive bays, if I want to expand later? Fyi...that guy is accepting offers down to $30 per card. I just bought several. Link to comment
Carpesimia Posted January 6, 2018 Share Posted January 6, 2018 9 minutes ago, StevenD said: Fyi...that guy is accepting offers down to $30 per card. I just bought several. You the man! Thanks for the tip!! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.