azzilla Posted October 3, 2018 Share Posted October 3, 2018 I just upgraded my parity drive from a generic seagate 6tb to a WD red 8tb and the temperature logged is around 15-20 degrees warmer than all the other drives. At the parity write it maxed out at around 55 degrees celsius. Now it is at 51 degrees. Is this really normal? Quote Link to comment
Harro Posted October 3, 2018 Share Posted October 3, 2018 15 minutes ago, azzilla said: I just upgraded my parity drive from a generic seagate 6tb to a WD red 8tb and the temperature logged is around 15-20 degrees warmer than all the other drives. At the parity write it maxed out at around 55 degrees celsius. Now it is at 51 degrees. Is this really normal? I know that my WD drives run a little warmer maybe 1 or 2 degrees than my Seagates but looking at your picture, I think you need to invest in more fans . You need to keep the temps down to below 40 on the drives or else you are risking eary hard drive failures. Just my opinion but I think others will agree. 1 Quote Link to comment
JorgeB Posted October 3, 2018 Share Posted October 3, 2018 If it's the new non helium model it will run warmer, but still just means you need better cooling. 1 Quote Link to comment
azzilla Posted October 3, 2018 Author Share Posted October 3, 2018 I know that my WD drives run a little warmer maybe 1 or 2 degrees than my Seagates but looking at your picture, I think you need to invest in more fans . You need to keep the temps down to below 40 on the drives or else you are risking eary hard drive failures. Just my opinion but I think others will agree.I know that my fan solution could improve overall. It’s just that the temperature varies so much. I have three 120mm fans in my Silverstone DS380 and I have never had temperatures over 35 degrees when idle. Not really concerned about life span at the moment as I am migrating the internals to a rack mount case soon. Then I can shove more fans in there and hopefully thermals will be better overall. Quote Link to comment
azzilla Posted October 3, 2018 Author Share Posted October 3, 2018 If it's the new non helium model it will run warmer, but still just means you need better cooling.Could be the new model. Will check on that when I get home. Thanks Quote Link to comment
JorgeB Posted October 3, 2018 Share Posted October 3, 2018 It's easy to spot: Helium / Air Quote Link to comment
azzilla Posted October 3, 2018 Author Share Posted October 3, 2018 It's easy to spot: Helium / Air Then it’s definitely air Are they worse in quality or something? Or is it just the cooling situation that’s been changed? Quote Link to comment
JorgeB Posted October 3, 2018 Share Posted October 3, 2018 32 minutes ago, azzilla said: Are they worse in quality or something? They are faster, since they use higher density platters, but also run hotter and use a little more power because of the no helium, which is best will depend on your priorities. Quote Link to comment
azzilla Posted October 10, 2018 Author Share Posted October 10, 2018 Just wanted to updatea bit and say that the temperatures has decreased drastically since i did some modifications to my Silverstone DS380. I 3d printed a "cooling duct" that i found from someone who had similar problems. https://blog.briancmoses.com/2017/04/creating-a-cooling-duct-for-the-silverstone-ds380.html I also installed two Noctua NF-F12 Industrial 3000rpm fans. Loud af but as my server is in the basement, thats not an issue. Thanks for all the advice! 2 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.