Red X (Solved)

[russlock]

Hi all. I woke up this morning and had a quick look at the mainpage to see a red X next to one of the drive. Does this now mean it is dead or is there something i can do with it?

i have attached the diagnostics as i have not re-booted or anything.

 

thanks in advance.

 

server-diagnostics-20181105-0739.zip

[JorgeB]

Disk dropped offline, so there's no SMART, reboot or power cycle to see if it comes back online and post new diagnostics.

[russlock]

5 hours ago, johnnie.black said:

Disk dropped offline, so there's no SMART, reboot or power cycle to see if it comes back online and post new diagnostics.

Will try tonight when I get in from work. Thanks 

[russlock]

5 hours ago, russlock said:

Will try tonight when I get in from work. Thanks 

attached is new zip file.

i rebooted and was the same as previous. then powered down and change to all new cables and powered back up and still the same.

 

thanks

 

server-diagnostics-20181105-1844.zip

[JorgeB]

11 minutes ago, russlock said:

and still the same.

It's not the same since disk2 is now back online, though it will still appear as disable since Unraid won't rebuild a disk automatically.

 

Sisk is showing some SMART warnings, so I would recommend replace an rebuild, but if you want to give it another chance rebuild using the old disk.

[russlock]

1 minute ago, johnnie.black said:

It's not the same since disk2 is now back online, though it will still appear as disable since Unraid won't rebuild a disk automatically.

 

Sisk is showing some SMART warnings, so I would recommend replace an rebuild, but if you want to give it another chance rebuild using the old disk.

will try a rebuild first to see if it solves problem. not sure how old the disk is as i have swapped a few out over the last few years.

thanks a lot for your help.

 

[russlock]

Have done a rebuild and things are ok now for about 24hrs, so fab news, thanks.

[hernandito]

IMHO If a drive shows SMART issues, I would replace. 

[trurl]

On 11/5/2018 at 2:46 AM, russlock said:

had a quick look at the mainpage to see a red X

You shouldn't have to look at the webUI to know about these problems. Setup Notifications to alert you by email or other agent. People who don't know immediately when they get a problem are the people who finally realize too late that they have multiple problems and can't recover.

[russlock]

19 hours ago, hernandito said:

IMHO If a drive shows SMART issues, I would replace. 

thanks for this. When i download the diagnostics and look at the smart report, what exactly am i looking for to determine that there are issues ? Thanks.

 

[hernandito]

Go to the GUI, main screen, click on the hard drive in question. Halfway down you’ll see SMART reports. If anything look odd, google it and see how bad it is.

 

not a super expert here.

[trurl]

On 11/7/2018 at 1:16 PM, russlock said:

thanks for this. When i download the diagnostics and look at the smart report, what exactly am i looking for to determine that there are issues ? Thanks.

https://en.wikipedia.org/wiki/S.M.A.R.T.#Known_ATA_S.M.A.R.T._attributes