Fridleif Posted September 29, 2019 Share Posted September 29, 2019 Hi, I'm new here and set up my first unRAID after watching some YT-videos. I've got the problem, that after I start den Mover from my SSD the system freezes. No access to the webinterface, no ping only a blinking cursor von VGA-Out but no letters if I type on the keyboard. During moving everything is fine. But couple of seconds later - freeze. I only have installed plex and jdownloader container. The parity check after forced reboot is fine too. Any suggestions, what can be the reason for the error? Thank you very much. Quote Link to comment
trurl Posted September 29, 2019 Share Posted September 29, 2019 Go to Tools-diagnostics and attach the complete Diagnostics zip file to your next post. Quote Link to comment
Fridleif Posted September 29, 2019 Author Share Posted September 29, 2019 6 minutes ago, trurl said: Go to Tools-diagnostics and attach the complete Diagnostics zip file to your next post. Hi, trurl, thanks for trying to help me. There it is: zeus-diagnostics-20190929-1508.zip Quote Link to comment
Squid Posted September 29, 2019 Share Posted September 29, 2019 Quote AMD Ryzen 5 1600 Have you disabled C-States in the BIOS. 1st Gen Ryzen's require that. Quote Link to comment
Fridleif Posted September 29, 2019 Author Share Posted September 29, 2019 5 minutes ago, Squid said: Have you disabled C-States in the BIOS. 1st Gen Ryzen's require that. I'll try it after the parity check is finished. Or can I just stop it and reboot - there are no important data on the system - just testing unRAID atm. Everytime 15 hours waiting for parity is really annoying Quote Link to comment
Squid Posted September 29, 2019 Share Posted September 29, 2019 Nothing says you ever have to let it finish a parity check. Up to your own comfort level and how important the data is. Quote Link to comment
Fridleif Posted September 29, 2019 Author Share Posted September 29, 2019 I tried it - hopefully I've took the right option. I've uninstalled plex as well. This was kind of stupid. The manual start of the mover worked fine. Hope - I hope it's keep that But it was a little bit stupid by me uninstalling and trying the option. Nevertheless - thanks for your help. Quote Link to comment
TQ Posted September 29, 2019 Share Posted September 29, 2019 I tried it - hopefully I've took the right option. I've uninstalled plex as well. This was kind of stupid. The manual start of the mover worked fine. Hope - I hope it's keep that [emoji3] But it was a little bit stupid by me uninstalling and trying the option. Nevertheless - thanks for your help.Good luck!Sent from a small phone with phat phingers Quote Link to comment
Fridleif Posted October 3, 2019 Author Share Posted October 3, 2019 Just to finish the topic. No freezing anymore - everything looks fine. Thanks a lot Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.