Scott Harkless Posted November 11, 2019 Share Posted November 11, 2019 I have 4 gig network cards in my server that are grouped into one network. I have the switch configured as a port group but seems every time I reboot the network may or may not always come back up. So i have to reboot again and hope it comes up after a second reboot which most of the time it usually does. Does anyone else have this problem? Am I doing something wrong? Quote Link to comment
John_M Posted November 11, 2019 Share Posted November 11, 2019 Which bonding mode are you using? Diagnostics grabbed when it's in the faulty network condition should provide some clues. Quote Link to comment
Scott Harkless Posted November 11, 2019 Author Share Posted November 11, 2019 Trying to get to it now the weird part is my dockers are up and working find but i cant get to the tower login screen. I have rebooted three times now. Quote Link to comment
Scott Harkless Posted November 11, 2019 Author Share Posted November 11, 2019 (edited) NVM I was wrong. I could open up plex on my desktop which i thought was working but it fails once open. So right now I cant do anything till i get home to see what is going on. Edited November 11, 2019 by Scott Harkless Quote Link to comment
Scott Harkless Posted November 11, 2019 Author Share Posted November 11, 2019 Ok finally got someone to help get me in. I had to unplug all but one of the cards and move it from the port group on the switch to get in. Below are my settings. Quote Link to comment
bonienl Posted November 11, 2019 Share Posted November 11, 2019 Your network settings show a bonded interface with 4 members and using LACP. This mode requires a switch which supports LACP too. Did you configure your switch properly (assuming it supports LACP)? Quote Link to comment
Scott Harkless Posted November 12, 2019 Author Share Posted November 12, 2019 Yes it is a Cisco switch configured with a port channel. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.