Letoh Posted February 7, 2020 Share Posted February 7, 2020 Had the AMD 580 passed through to a Win 10 VM hang and freeze up my Host so had to reboot. (I am patiently awaiting the fix for this). I however have hit a issue on startup. All apps, dockers and VM did not restart this time and the web interface did not come up. To get the web interface up I had to run: nohup /usr/local/sbin/emhttp -p 80 I was then able to restart but again the emhttp did not start. I have tried updating to 2.8.2 to see if this helped but found the same on reboot and had to manually start emhttp manually. After updating I noted that all my plugins were missing and had to re-add. I was able to enable Docker and found that although my docker configs were there, I had to reload each of them from Apps get them operational. I also had to enable VMs and they seemed fine. I tried another reboot and found that again I had to manually load emhttp to get things to work. I have attached my diagnostics. Any suggesting on how to fix this? tower-diagnostics-20200208-0019.zip Quote Link to comment
JorgeB Posted February 7, 2020 Share Posted February 7, 2020 You flash drive is missing the go file, it should be on the config folder, extract from an Unraid downloaded zip. Quote Link to comment
trurl Posted February 7, 2020 Share Posted February 7, 2020 Do you have .FSCK files on your flash? Quote Link to comment
Letoh Posted February 7, 2020 Author Share Posted February 7, 2020 Thanks heaps for you assistance. Go file was missing and there were FSCK*.REC files on the USB flash. I have moved a copy of the go from a backup of the flash drive. Oddly there are duplicates of DISK_ASSIGNMENT.txt & machine-id files: I will remove these duplicates and give the system a reboot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.