talex Posted December 9, 2010 Share Posted December 9, 2010 Hi all, Anyone running unRaid with SUPERMICRO AOC-SASLP-MV8? I had just built up a Norco and have 2 of these 4x Controllers in it (basically built one of the recommended systems found on AVForums) for a home server box, but with the dropping of DE I would like to use my Unraid Pro I purchased for this and want to confirm that unRaid will work reliably with these controllers. Link to comment
StevenD Posted December 9, 2010 Share Posted December 9, 2010 I think the question around here is who is NOT using that card?!?! Link to comment
talex Posted December 9, 2010 Author Share Posted December 9, 2010 well that is a relief, without DE... WHS is pretty much a dead product to me and it's nice to have unraid to fall back on. Link to comment
boof Posted December 9, 2010 Share Posted December 9, 2010 http://code.google.com/p/greyhole/ is a DE-esque alternative that runs under linux. I've given it a quick test and it worked quite well - though whether you'd want to trust your data to it would have to be your call! And relative to your actual question, I'm running that controller under unraid with 4 drives hanging off it currently. No problems. Link to comment
talex Posted December 9, 2010 Author Share Posted December 9, 2010 don't think I will try that beta, seems unRaid already does the "drive extender" stuff pretty well already, I look at unRaid like a drobo without the limits on drives by the case... this is what I want unRaid for, protection and serving of my video's. Ideally here unRaid could show up on my WHS so WHS could control backups and access permissions like WHS does. Do not know what will happen with WHS vail, but without DE I do not think I will be using it. What I currently have is a WHS v1 in my basement which is backed up to an unRaid box in my Garage... Link to comment
joshpond Posted December 10, 2010 Share Posted December 10, 2010 The card is supported, have 7 drives running off it. It does clash with my motherboard SATA drives when set in AHCI mode though. Search my post on the motherboard and level 1 testing if you want to know more but I haven't heard any others with this issue. Josh Link to comment
prostuff1 Posted December 10, 2010 Share Posted December 10, 2010 The cards work great. I have 2 in a server I am building for a customer. I put one in, disabled INT13, and then did the same for the other card. I did have to flash some Seagate drives to CC35 and could not do that with the Norco 4224 and these cards. I had to plug each drive into the motherboard SATA AHCI ports separately before the force flash to CC35 would work. Link to comment
jpimlott Posted December 30, 2010 Share Posted December 30, 2010 How important is flashing the Seagate 2 TB drives. I have 5 those running now with not troubles with the onboard sata controller. I just ordered a new supermicro card and wondering if any troubles if I dont upgrade the firmware on the drives. On a different note what case to use to get above 16 when the times comes? Antec 1200 with 4 4in3 is 'only' 16. Its a long way off but still. My currant case holds 11. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.