josh2008 Posted April 4, 2020 Share Posted April 4, 2020 I was having a drive go bad, so I took the old drive out and put the new one in. During the data rebuild it came up with a lot of write errors. The cache drive also seems not to be working. I don't know what I should do. Any ideas would be great. Thanks! Quote Link to comment
Squid Posted April 4, 2020 Share Posted April 4, 2020 You should post your diagnostics Quote Link to comment
josh2008 Posted April 4, 2020 Author Share Posted April 4, 2020 tower-diagnostics-20200404-1555.zip Quote Link to comment
trurl Posted April 5, 2020 Share Posted April 5, 2020 All disks have dropped. Could be connections, could be controller. Shutdown, check all connections, and restart rebuild. Are you sure the disk even needed replacing? As you can see from this situation, you can have disk errors even if the disks are good. Quote Link to comment
josh2008 Posted April 5, 2020 Author Share Posted April 5, 2020 I am pretty sure it needed replacing. It came up multiple times with 5 to 10 disk errors. I will check all of the connections. Thanks. Quote Link to comment
JorgeB Posted April 5, 2020 Share Posted April 5, 2020 SATA controller problem, this is fairly common with Ryzen boards, according to a recent report upgrading to v6.9-beta1 which includes a much more recent kernel fixed it. Quote Link to comment
josh2008 Posted April 5, 2020 Author Share Posted April 5, 2020 (edited) Ok, I checked all of the connections and they were good. I restarted the machine and all of the disks showed up. I decided to do a parity check. It started off fine and when I woke up this morning, disk 1 wasn't mounted. I am going to upgrade the OS and check in later. Edited April 5, 2020 by josh2008 Quote Link to comment
trurl Posted April 5, 2020 Share Posted April 5, 2020 4 hours ago, josh2008 said: I decided to do a parity check. I thought you were doing a disk rebuild. Did that ever complete? Quote Link to comment
josh2008 Posted April 5, 2020 Author Share Posted April 5, 2020 Yeah, It completed just had a lot of errors. I already tried to do 1 parity check but it stopped about half way through with a lot of errors. I went a head and upgraded to the beta OS and started a new parity check. So far so good! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.