damnshaneisthatu Posted April 9, 2020 Share Posted April 9, 2020 What steps should I take to correct this? Thanks in advance. Quote Link to comment
JorgeB Posted April 9, 2020 Share Posted April 9, 2020 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
damnshaneisthatu Posted April 9, 2020 Author Share Posted April 9, 2020 jarvis-diagnostics-20200409-0212.zip Quote Link to comment
itimpi Posted April 9, 2020 Share Posted April 9, 2020 Provide the diagnostics zip file (Tools >> Diagnostics) so we can get a better idea of the current state of your system Quote Link to comment
JorgeB Posted April 9, 2020 Share Posted April 9, 2020 Diags are after rebooting so we can't see what happened, my first guess would be the not so uncommon SATA controller problem with Ryzen based boards. Parity looks fine, so check filesystem on disk2 and re-sync parity, if it happens again make sure to grab diags before rebooting. 1 Quote Link to comment
damnshaneisthatu Posted April 9, 2020 Author Share Posted April 9, 2020 Thanks, @johnnie.black. Performed a successful check filesystem, rebooted. Disk 2's status is back to normal. The parity is still disabled. Is a "Read-Check" the same as a re-sync at this stage? Quote Link to comment
JorgeB Posted April 9, 2020 Share Posted April 9, 2020 You need to re-enable it: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.