Tino Hau Posted June 22, 2020 Posted June 22, 2020 (edited) Hey everyone, I am a beginner at unraid. Today there was a power crash at my home, unfortunately the nas was no longer supplied with power and went off. When the power was back on, I pressed the power button in the hope that everything would start up normally. It boots as seen in the picture, but as it seems it does not establish a connection to the internet and I cannot control it in any other way. Can't access via web browser. Can someone help me how exactly I proceed here so that it runs as normal again and the data is not lost. many thanks for the help Edited June 22, 2020 by Tino Hau Quote
trurl Posted June 22, 2020 Posted June 22, 2020 What do you get from the command line with this? ifconfig 1 Quote
Tino Hau Posted June 22, 2020 Author Posted June 22, 2020 (edited) got it. It showed me the IP and I can acess now via web browser thanks for the fast response. I will now click on "start" to bring the array back online right? or should I do anything else before? Edited June 22, 2020 by Tino Hau Quote
Frank1940 Posted June 22, 2020 Posted June 22, 2020 (edited) Look at the Main page on the GUI and make sure that all of the drives are mounted. If they are all there, you can start the array. It will begin by running a parity check. If any are missing, get a diagnostics file Tools >>> Diagnostics Post the file in a new post. Edited June 22, 2020 by Frank1940 1 Quote
Tino Hau Posted June 22, 2020 Author Posted June 22, 2020 working fine. All drives are there. thanks - Problem solved Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.