nnzy1734 Posted August 17, 2020 Share Posted August 17, 2020 Hi! I turned on my server today to find this message under Fix Common problems. "Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged". I have mcelog installed via NerdPack. Unsure as to what is the issue, but highly appreciate if someone can take a look at my attached diagnostics files. Running version 6.8.3 Thanks in advance! tron-diagnostics-20200817-2131.zip Quote Link to comment
sublime24 Posted August 23, 2020 Share Posted August 23, 2020 Hello, Im having the same issue. Same Version. Please advice Thank you, Quote Link to comment
trurl Posted August 23, 2020 Share Posted August 23, 2020 2 minutes ago, sublime24 said: Hello, Im having the same issue. Same Version. Please advice Thank you, Post your diagnostics Quote Link to comment
trurl Posted August 23, 2020 Share Posted August 23, 2020 On 8/17/2020 at 3:37 PM, nnzy1734 said: someone can take a look at my attached diagnostics files. Have you done memtest? Quote Link to comment
nnzy1734 Posted August 24, 2020 Author Share Posted August 24, 2020 17 hours ago, trurl said: Have you done memtest? No, I will try running it tonight to see if it produces anything. Thanks for the tip! Quote Link to comment
sublime24 Posted August 24, 2020 Share Posted August 24, 2020 syslogkaching-diagnostics-20200823-1119.zip Quote Link to comment
trurl Posted August 24, 2020 Share Posted August 24, 2020 28 minutes ago, sublime24 said: Your syslog is full of this: Aug 23 11:10:24 KaChing s3_sleep: Disk activity on going: sdb Aug 23 11:10:24 KaChing s3_sleep: Disk activity detected. Reset timers. Aug 23 11:11:24 KaChing s3_sleep: Disk activity on going: sdb Aug 23 11:11:24 KaChing s3_sleep: Disk activity detected. Reset timers. I don't use that plugin but I haven't seen that in other syslogs so I assume there must be some way to get rid of it. Does the plugin have an option to enable/disable logging? On 8/23/2020 at 1:32 PM, trurl said: Have you done memtest? Quote Link to comment
sublime24 Posted August 24, 2020 Share Posted August 24, 2020 (edited) I forgot I had that plugin configured haha, I just removed it. My server no longer sleeps as I use it for my Home Assistant DB. I have not ran a memtest, this can be done at the Unraid boot menu? I do see this error, could this be the issue? I noticed this hard drive is also hotter than the others. Edited August 24, 2020 by sublime24 Quote Link to comment
trurl Posted August 24, 2020 Share Posted August 24, 2020 CRC errors are usually connection issues. A small number not increasing is nothing to worry about. Just acknowledge the CRC error by clicking on the "thumbs down" on the Dashboard. It will warn you again if that increases. 42 minutes ago, sublime24 said: memtest, this can be done at the Unraid boot menu Yes. You might have to boot in non-UEFI mode to run memtest. Quote Link to comment
sublime24 Posted August 24, 2020 Share Posted August 24, 2020 Thank you for the information. I will run the test in a day or two as I read its pretty intrusive. Quote Link to comment
Squid Posted August 24, 2020 Share Posted August 24, 2020 10 hours ago, nnzy1734 said: No, I will try running it tonight to see if it produces anything. Thanks for the tip! Your MCE's are being issued at initialization time of the cores. Fairly common, and nothing to worry about. 2 hours ago, sublime24 said: syslog 830.57 kB · 1 download kaching-diagnostics-20200823-1119.zip 142.95 kB · 1 download Your problem @sublime24 may also be because you're running an ancient BIOS revision. Update it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.