Jump to content

Hacking Attempt


Omeed

Recommended Posts

I got the following message:

 

Possible Hack Attempt on Sep 17On Sep 17 there were 297 invalid login attempts. This could either be yourself attempting to login to your server (SSH / Telnet) with the wrong user or password, or you could be actively be the victim of hack attacks. A common cause of this would be placing your server within your router's DMZ, or improperly forwarding ports.

This is a major issue and needs to be addressed IMMEDIATELY

NOTE: Because this check is done against the logged entries in the syslog, the only way to clear it is to either increase the number of allowed invalid logins per day (if determined that it is not a hack attempt) or to reset your server. It is not recommended under any circumstance to ignore this error

 

I'm not an expert user by any means. I use my unraid server mostly for Plex and a pi-hole. I have attached the log, and it shows the hacking attempts are coming from my router. Any possible advice? I have Netgear orbi router with one satellite. The satellite is wired to my server. You may have to dumb it down for me. Thank you in advance.

 

https://linksharing.samsungcloud.com/RcjuDMQBA3fN

Link to comment

As allready commented, you should never face your server to the internet.

But most probably if the IP is always the one from your router, it might be as described above.

Check if vulnarability scans are active on your router.

 

Please attach your diagnostics file (Tools/Diagnostic) to your next post so someone can look into it.

Edited by Kevek79
Typo
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...