casperse Posted October 20, 2020 Share Posted October 20, 2020 Hi All For a very long time I had problems using the Unraid certf. on a UNIFI router and I had to make these changes: After that I only used my local IP address after that! But by mistake I enabled SLL and I did remove it afterwards in the file ident.cfg file # Generated settings: NAME="PLEXZONE" timeZone="Europe/Paris" COMMENT="The Ultimate Media Server" SECURITY="user" WORKGROUP="WORKGROUP" DOMAIN="" DOMAIN_SHORT="" hideDotFiles="no" localMaster="yes" enableFruit="no" USE_NETBIOS="yes" USE_WSD="yes" WSD_OPT="" USE_NTP="yes" NTP_SERVER1="time1.google.com" NTP_SERVER2="time2.google.com" NTP_SERVER3="time3.google.com" NTP_SERVER4="time4.google.com" DOMAIN_LOGIN="Administrator" DOMAIN_PASSWD="" SYS_MODEL="Xeon E-2100G based 24-bay NAS system" SYS_ARRAY_SLOTS="24" SYS_CACHE_SLOTS="1" USE_SSL="no" PORT="80" PORTSSL="443" LOCAL_TLD="local" BIND_MGT="no" USE_TELNET="yes" PORTTELNET="23" USE_SSH="yes" PORTSSH="22" USE_UPNP="no" START_PAGE="Main" # Generated settings: NAME="Tower" timeZone="Europe/Paris" COMMENT="The Ultimate Media Server" SECURITY="user" WORKGROUP="WORKGROUP" DOMAIN="" DOMAIN_SHORT="" hideDotFiles="no" localMaster="yes" enableFruit="no" USE_NETBIOS="yes" USE_WSD="yes" WSD_OPT="" USE_NTP="yes" NTP_SERVER1="time1.google.com" NTP_SERVER2="time2.google.com" NTP_SERVER3="time3.google.com" NTP_SERVER4="time4.google.com" DOMAIN_LOGIN="Administrator" DOMAIN_PASSWD="" SYS_MODEL="Xeon E-2100G based 24-bay NAS system" SYS_ARRAY_SLOTS="24" SYS_CACHE_SLOTS="1" USE_SSL="no" <------- ok? PORT="80" PORTSSL="443" LOCAL_TLD="local" BIND_MGT="no" USE_TELNET="yes" PORTTELNET="23" USE_SSH="yes" PORTSSH="22" USE_UPNP="no" START_PAGE="Main" I also removed any certificate in the folder: \flash\config\ssl (I have a SWAG/Lets encrypt docker running using port 443 so I guess that would also interfere with the auto creation of a temp Unraid certificate?) But how do I re-enable connection by IP to my server without rebooting the server? No matter what I do now right now it will translate my local IP to a Servername.local that breaks my access to the server? I cant remember what I need to do? Very long time ago, I removed this with the help of Limetech support because I couldnt connect to my server My GO file is like this: #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & #Setup drivers for iGPU hardware transcoding in Plex modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri And in my Ident menu I dont have any http/Sll options available I have tried googling and reading the forum post but so far no luck Quote Link to comment
Squid Posted October 21, 2020 Share Posted October 21, 2020 15 hours ago, casperse said: But how do I re-enable connection by IP to my server without rebooting the server? You've got to reboot Quote Link to comment
casperse Posted October 21, 2020 Author Share Posted October 21, 2020 6 hours ago, Squid said: You've got to reboot I was afraid you would say that.... 🤕 So login by prompt and reboot command....thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.