Gizo Posted November 26, 2020 Share Posted November 26, 2020 This just started to show up this morning, unsure what it could mean. Also all my dockers aren't bring up and webgui options just, pause, resume, exist, and the such. I've attached a diagnostic if thatch helpful at all Thanks gizbo-diagnostics-20201126-0619.zip Quote Link to comment
JorgeB Posted November 26, 2020 Share Posted November 26, 2020 Check filesystem on both disks, also parity is invalid. Quote Link to comment
Gizo Posted November 26, 2020 Author Share Posted November 26, 2020 1 minute ago, JorgeB said: Check filesystem on both disks, also parity is invalid. Disk 1 isk xfs Disk 2 Auto rest are xfs. Parity is invalid because I had to do a hard reset. Would this have anything to o with that or just might be odd? thanks Quote Link to comment
JorgeB Posted November 26, 2020 Share Posted November 26, 2020 4 minutes ago, Gizo said: Parity is invalid because I had to do a hard reset. That would not invalidate parity, invalid means the disk was disabled in the past. Filesystem corruption can be caused by the hard reset. Quote Link to comment
Gizo Posted November 28, 2020 Author Share Posted November 28, 2020 That would not invalidate parity, invalid means the disk was disabled in the past. Filesystem corruption can be caused by the hard reset.Is there anyway to tell? Disk1 and 2 both still say unmountable disks present. Sent from my iPhone using Tapatalk Quote Link to comment
trurl Posted November 28, 2020 Share Posted November 28, 2020 9 minutes ago, Gizo said: Disk1 and 2 both still say unmountable disks present. On 11/26/2020 at 9:59 AM, JorgeB said: Check filesystem on both disks https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Quote Link to comment
Gizo Posted November 29, 2020 Author Share Posted November 29, 2020 https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Will using the maintenance mode xfs repair tool format the drives aka will I loss my data. I bought a 12 pack of sata cable try changing them all hoping it was just a cable issue or kapton tape not sticking in the right spots but no luck as of yet. Another thing I would like to add is when my USB drive was acting up I replaced it. About a week ago. Wa giving read write errors. Needless to say. When I did change USB drive my server IP number changed. And it’s basically impossible to connect to my server through the webgui. It was up for 15 or so hrs just trying to copy as much data to externals as I can right now. Praying for least amount of corruption as possible, if any.. When I’m home ([emoji1692]if the server is up) I’ll add another diagnostic if that would help at all. Does a disk unmountable usually always mean corruption?Thanks in advance sorry crappy grammar at work [emoji48]Sent from my iPhone using Tapatalk Quote Link to comment
trurl Posted November 29, 2020 Share Posted November 29, 2020 1 hour ago, Gizo said: Will using the maintenance mode xfs repair tool format the drives aka will I loss my data. Of course not. Why would we recommend it if it would format the drives? It will attempt to repair the filesystem. Your data is effectively "lost" until you repair since the filesystem can't be mounted. How successful the repair will be remains to be seen. Do you have backups of anything important and irreplaceable? Quote Link to comment
trurl Posted November 29, 2020 Share Posted November 29, 2020 1 hour ago, Gizo said: It was up for 15 or so hrs just trying to copy as much data to externals as I can right now. Since the unmountable disks can't be read, and the mounted disks can be, copying to externals won't recover any of the data from the unmountable disks. Good idea to have backups of course. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.