roobix

Confirmed it was my idiocy and was missing the cable between the expander and controller. Thanks everyone!

I think i misread the expander being "plug in play" in other posts and didn't realize it needed a mini sas connection to the controller.. I ordered one and this will probably solve my issues. If it does, I'll come back here and mark this thread "solved" Thanks for all those who came to read this thread and sorry for probably wasting your time.

removing the 3.3 pin from one of the western digital drives turned it on, but I think my expander isn't working. Is there a way for me to tell if it's being detected or on?

Update: I was trying to use my PCI E 16x (usually for graphics card) and it wasn't providing any power in that slot (my graphics card died in that slot previously) and I didn't notice. Moving it down 1 pci slot got the HBA working, but I only see 4 drives instead of the 16 I have connected.. Here is more info: Controller: IBM M5110 6Gbs PCI-E HBA FW: P20( LSI 9207-8i IT) Two SFF-8087 to SATA Forward Breakout cables connected to 8 drives The four drives that Unraid sees is from one of these cables on this controller. Expander: Intel RAID Storage Expander RES2SV240 E91267-203 Two of the same cables connected to 8 more drives I don't think the system sees the expander. Hard Drives: Some of the ones not showing up are Western Digital external backup drives that I shucked. Would the extra power pin that people sometimes have to tape over/remove need to be removed from the drives not showing up?

I also have a few SATA HDDs connected to the on board SATA ports and those aren't showing up in Unraid either in case that matters..

I recently tried to create a brand new unraid server and I can't figure out why none of my hard drives are showing up... Motherboard is a Gigabyte ga-z170x-gaming 3 Controller: IBM M5110 6Gbs PCI-E HBA FW: P20( LSI 9207-8i IT) This exact one Expander: Intel RAID Storage Expander RES2SV240 E91267-203 This exact one I have 15 16 hard drives connected..i touched a few of them and they seem to be running...

I can't find the words to explain an issue I'm having, but has anyone run into a similar scenario: QBittorrent downloads FavShow E01S01.mp4 into \FavShow.E01S01.WAZZAAAH\FavShow E01S01.mp4 (notice that there are periods in the folder name) Sonarr can't import saying the following: "Import failed, path does not exist or is not accessible by Sonarr:[Snip] /FavShow E01S01 WAZZAAAH" (notice how the periods are replaced with spaces in the folder name) I've looked at both dockers and can't figure out what is causing the confusion between the two or whether it's a setting. Both dockers have been working for months until just this last week. Thanks for any help.

Can someone help me find the yacreaderlibrary.ini file? i see this comment and command in the dockerfile on github, but I can't seem to actually locate it using Krusader.. ADD YACReaderLibrary.ini /root/.local/share/YACReader/YACReaderLibrary/ The reason I'm asking is because I'm getting this error in the yacserver log and I think I read somewhere that I just need to change the port in the ini to something other than 8080. I've done that in Unraid, but someone thinks it might be related to the setting in the ini file. It only happens when i try to access my server from an Ipad: WARN 2020-09-29T23:09:44.039 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:44.041 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:44.037 QSqlDatabasePrivate::addDatabase: duplicate connection name '/comics/.yacreaderlibrary14b6d12a0700', old connection removed. WARN 2020-09-29T23:09:44.039 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:44.041 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:46.837 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:46.838 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:47.604 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:47.608 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work. WARN 2020-09-29T23:09:47.629 QSqlDatabasePrivate::removeDatabase: connection '/comics/.yacreaderlibrary14b6d12a0700' is still in use, all queries will cease to work.

Does anyone know what causes the docker to display as abandoned in Unraid? I can't remember the exact msg that Unraid displayed, but my Binhex Jacett docker dropped to the bottom of the docker list and i couldn't open it to edit settings. I had to go into CA and reinstall.

Hi can someone help with a few questions on the YACServer docker? 1. Am I supposed to copy/paste the steps into the _Console of the docker? 2. Is there a web console? If yes, how do I change the port from 8080 to sound else? I tried changing WebUI and Host Port to 5050, but I get connection confused. Sorry, new to dockers and thanks! EDIT: I believe I was able to figure this out and I wanted to help others who are interested in creating their own YAC server. My tips are for those who are installing via Community Apps. (xthursday or anyone, please feel free to correct my assumptions/mistakes) To run the commands provided in the instructions, you will need to use the terminal and not the docker's console. The terminal is located at the top right of the UNRAID GUI as an icon that looks like this: >_ If you downloaded xthursdayx's docker from community apps, then DO NOT do step 1 or step 5. I believe: Step 1 is to install the docker which CA is already doing. I think you're only supposed to do this step if you aren't installing via CA? Step 5 is only if you want to remove your generated library for YAC server. Step 2a or Step 2b Step 2a is if you want to create a new library which will be most new installs Step 2b is if you are updating an existing library that you previously created. <library-name> is whatever you want it to be.

Just wanted to give an update that I replaced the cable last night, reused the same bay and drive that was giving me issues and the drive was successfully rebuilt into my array without any errors. Thanks!

Is it possible to run adventure maps with this bedrock server?

Thanks for checking in! I'm using a Rosewill 4U RSV-L4412 as my enclosure and, yes, a Mini SAS to 4-SATA SFF-8087 Multi-Lane Forward Breakout Cable. The one I ordered off Amazon seems to have a decent number of positive reviews (hoping they're not shill reviews lol). It might just be the same exact cable between eBay and Amazon, but I wasn't really sure where to find a better one.

Hey Binhex, not sure if this is related to the server.properties file not generating or just my stupid setup for unraid, but I wanted to share in case it helps you or anyone else. I tried to create a second MC server and followed your steps, but it wouldn't create all the necessary files in its own config folder. It would only create \[custom_minecraft_container_name]\minecraft\security\ In the [custom_minecraft_container_name] folder, it also created perms.txt and supervisord.log deleting perms.txt and restarting the new container would magically create all the files inside the \minecraft\ folder I also originally had issues modifying files in the bedrock_level folder, but deleting perms.txt allowed me to make changes. If this doesn't help anyone, please ignore me..

The Smart Report indicated there were no errors so based on other folk's threads/suggestions, I decided to try and rebuild the drive back into my array by doing this: Stop Array > Unassign Disk > Restart Array > Stop Array > Reassign Disk About 2 mins into the parity check, i get a read error and the disk is disabled again. I replaced the disk with a brand new drive and still got the parity check error. At this point, I'm thinking it's the bay or cable so I moved the drive into a different slot and it's currently allowing me to rebuild. The bay with the issue is using an IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller. The bay I'm currently testing with is also using that controller so I'm really hoping it's just a cable issue. I just placed an order for a new cable via amazon in case the one I got off ebay was just really poorly made. If I still continue to have the issue, I may look at the controller or PSU since someone in another thread mentioned it could be a PSU issue and I'm using an old 500 watt one right now.. If anyone thinks there is a better path or that I'm on the wrong track, please let me know and thanks!

I just attached the Smart Report to the original post. Any suggestions on what my next steps should be? Thank you for any help!

ok thank you. I will attach once it's available

Hi Everyone, I don't think I've ever gotten this error and reading a few posts from others on the same error seems to indicate I need your expert help in diagnosing my diagnostics. I noticed people run Smart tests on the disks and according to what I saw in the Unraid GUI, I did not run a test or this disk, but there is a test log in the SMART folder of the diagnostics zip. I'm running Unraid 6.8.3 and this disk is maybe half a year old.. I'm currently trying to run an extended smart test. It's been stuck at 10% for at least 30 mins. I have a spare drive I can plop in if needed I'm trying to learn as much as I can about unraid, but I'm not sure what my next steps should be.. whether i should rebuild this drive, replace it, or something else Thank you kind souls for any help. This is the error I'm seeing: Unraid Disk 5 error: 10-07-2020 04:55 Alert [TOWER] - Disk 5 in error state (disk dsbl) WDC_WD80EMAZ-00WJTA0_2SGD8S3J (sdf) Edit: I added the extended smart test. After completion, the status said "Completed without error." Can anyone tell me what my next steps should be? Thanks! tower-diagnostics-20200710-1856.zip tower-smart-20200711-0838.zip

When I try to use the search tab in the WebGUI, the search results are all over the place and rarely relevant to the keywords I'm using. Does anyone know why? I tried searching this topic for "search" and came up with nothing that helped me.