-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by der8ertl
-
-
hmm.. can i check this within the script?
so that it runs daily, but if it sees its friday, or first day of the month, then exit?
I'm not an expert, I've just copied @mgutt's backup-script (thank you!) and changed it a little
thanks in advance!
-
ok what now?
does that mean, i cannot use this?
neither
0 1 2-31 * 0-4,6
nor
0 1 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 * 0,1,2,3,4,6
is working
but i really would like to exclude fridays (backups of some vms from a different host roll in) and the first day of the month (monthly parity check) with this setting.
any other suggestions?
-
On 2/10/2022 at 2:05 PM, Squid said:
Instead of 2-31 and 0-4,6 use 2,3,4,5 .... and 0,1,2,3,4,6
Hi again,
so, it took me a while, but unfortunately it does not work..
is that cron setting general to complicated, to long, or can there be something wrong on my system?
can I provide any additional information for analysis?
thanks in advance!
-
i will give it a try and report back
thank you!
-
Hi,
thank you for this great plugin.
i've been playing around with custom cron settings.
unfortunately i cannot get it to run with "0 1 2-31 * 0-4,6" (run at 1:00, from 2nd to 31st day of month, each month, sun to thu and sat of week)
i've used https://crontab.guru/ to generate this
is this a bug or a feature 😘
any help will be appreciated
thank you!
-
i know this is an old topic, but is there any news about nfs 4?
i really don't want to run a docker (like in the workaround menationed above)
-
so thank you again @JorgeB for the suggestion, the method seems to work and i have already rebuilt two disks with it
my data seems alright
- 1
-
danke leute für die lösungsvorschläge
-> die lösung aus meinem englischen post scheint zu funktionieren, zwei disks wurden damit schon wiederhergestellt und die enthaltenen daten scheinen korrekt
-
On 7/10/2021 at 3:03 PM, mgutt said:
Nach deinem Beitrag musst du wohl eher drauf legen 😅
ich hab nicht gesagt, dass sie nicht funktioniert 😜
-
adaptec asr-6805e
die wäre jetzt günstig zu haben, falls wer interesse hat 😉
-
ungeduldig wie ich bin hab ich auch im englischen forum gepostet:
es scheint als gäbe es eine methode per rebuild von emulierten daten
ich versuch das grad, geb dann noch bescheid
-
thank you for the other thread
i already tried unassigning and looking on the emulated data, it looks correct so i am now rebuilding one data disk with the method described there
i will report back
-
hello there
i've already tried to search, and there are similar topics, but none fits my issue
then I've also already postet in the german support section, but it seems not the right spot because nobody seems to be able to help (I'm very sorry that I'm this intrusive)
here is my other post with also included diagnostics:
my unraid server had a pcie sas raid card which i replaced with a sas hba, the affected disks were connected as jbod on the raid card which is to my knowledge the same as a hba does (?)
now i have the problem, that all my array disks show up as "Unmountable: Unsupported partition layout"
what i've already tried:
- mount the disks with unassigned deviced plugin -> works, filesystem xfs is recognized and i can see my data
- xfs repair in maintenance mode with -L flag -> does find the superblock and clears a log (?), but unfortunately disks stay unmountable
i've testet this prior with one single drive of the array, checked if the data is ok with "ud" plugin and started up the array, this one drive was then mountable
unfortunately, after i performed the actions on the other drives, the status of them does not change and the one drive which has functioned, is now showing up as "Unmountable: not mounted"
i am at the end of what i was able to find and as my knowledge of linux and therefore unraid is very limited as i am a windows user i hope that someone here can help me get my data back
thanks in advance!
~d8
-
hallo helferlein
ich habe über die suchfunktion bereits ähnliche themen gefunden, jedoch passt keines auf mein problem
ich habe bei meinem unraid server einen neue gebrauchte pcie hba karte eingebaut und damit eine raid karte ersetzt. die betroffenen disks waren zuvor an der raid karte im jbod modus angeschlossen, jetzt mit der haba karte gibt es ja keine einstellung sondern es werden einfach alle disks direkt ans os übergeben (denke ich)
jetzt habe ich das problem dass alle meine array disks als "Unmountable: Unsupported partition layout" angezeigt werden.
was ich bereits versucht habe:
- mount mit unassigned devices plugin:
-> funktioniert, das dateisystem wird als xfs erkannt, ich kann alle daten sehen
- xfs repair im maintenance mode über gui mit -L option
-> keine statusveränderung, die disks bleiben (nach array stop und normal start) unmountable, erneuter test mit unassigned devices: ok
ich habe diesen vorgang erst mit nur einer disk getestet, die konnte dann sogar wieder gemounted werden, also habe ich alle anderen disks gleich behandelt
die erste disk wird jetzt jedoch "Unmountable: not mounted" angezeigt
da ich als windoof user ein linux (und damit auch unraid) nackerpatzl bin brauche ich jetzt eure hilfe
anbei noch meine diagnostics
danke jetzt schon mal!!
~d8
-
ich hab auch den linuxserver.io nextcloud container laufen und bekomme die integrierte version nicht zum laufen, also hab ich auch wie im video von spaceinvader versucht einen stand-alone container für den document server zu installieren
erst den originalen über dockerhub (selbst konfiguriert nach dem beispiel im video) - proxy ist mir nicht gelungen
jetzt den von chvb - blöderweise schaffe ich es auch damit nicht reverseproxy zum laufen zu bringen
kann mir da jemand helfen?
danke!
grüße, d8
-
On 4/21/2021 at 10:20 PM, upgrade68 said:
habe mir jetzt den Docker chvb/onlyofficedocumentserver:latest installiert mit Netzwerktyp br0
aber was muss ich in Nextcloud unter Einstellungen / Onlyoffice / Serveradresse
eingeben https:// ...
hallöllö
schau dir als einstieg vielleicht mal das video zur onlyoffice/nextcloud integration von spaceinvaderone an
-
On 10/4/2020 at 4:45 AM, scd780 said:
Hi Dent_,
Nope didn't get back to troubleshooting as it wasn't a huge concern at the time, just something I wanted to enable to backup my parents' devices. At this point my best guess is something to do with DNS and the proxy? I have a pihole container that is my DNS but not DHCP and it doesn't seem to recognize cnames no matter what I do (newbie so I hope I'm using the term correctly. Example of this behavior would be that I have to use the direct IP of my unRAID server instead of the given name to access the webGUI).
I seem to remember thinking that I may have set the wrong, or not all of the necessary ports in the proxy config file. So that may be something to look into if you're troubleshooting yourself! Let me know if you figure it out
If you do go this route, don't forget to set a password on your urbackup installation!
is there any progress on this?
I have also tried to get it to work in a similar way, but no success..
if anyone has a working proxy config for swag, please share
thanks a lot!
-
On 2/15/2021 at 8:44 PM, jtroberts said:
@binhex@jonathanm
I'm having trouble with the local client. No issues with the docker, that all works fine. I ran the script from here. I can see the binary created on the unraid server in /usr/local.bin and I can execute the bin file but I am jsut not sure what parameters need to be included. PS: my client is not discoverable in the docker GUI.
/usr/local/bin# ./urbackupclientctl start -c 172.16.1.66 -f
Error starting backup. No backup server found.
I should also add I have a dual-homed system.
eth0.10 = private lan to VPN outbound (default system route)
Eth1 = Plex an a few other dockers on the user lan
I control each dockers access by choosing which network. UrBackup is on br0.10 - 172.16.1.0/24
Thanks in advance
[edit]
Fixed. Allowed Host access to Custom networks in the Docker setup.
[How-to]
1. Install and start URbackup client
TF=$(mktemp) && wget "https://hndl.urbackup.org/Client/2.4.11/UrBackup%20Client%20Linux%202.4.11.sh">
2. CD to URbackup client path
cd /usr/local/bin
3. Add Directory to be backed up
urbackupclientctl add-backupdir -d /mnt/user/Videos
urbackupclientctl add-backupdir -d /mnt/user/Pictures
4. Start backup
urbackupclientctl start -f
this sounds awesome!!
maybe binhex would like to also prepare a plugin or docker for the client side 🥰?
I would appreciate!
-
wanted to bring that up again:
+1
if not LT, maybe there is an interested comunity developer?
the snapshots are not only interesting for the vms, but also for general btrfs, since we can use multiple pools now
take me for example, i have a raid5 pool of 5 hdds with most my live date (i know raid 5 and 6 are experimental) and would love to take controlled snapshots via a gui (i am not so familiar with console on not windows os, sry)
greetings from vienna
-
On 10/9/2020 at 2:33 PM, FlorinB said:
With multiple pools I am seeing this as multiple "cache" drives. Since the Mover is able to move the data from the pools to Array, it will be helfpul (at least for me) to use the unBalance as well for Scatter & Gather the data between Array and pools.
+1 for this
as unbalance was able to utilize the "old" cache drive, it would absolutely make sence (also for me ) to have the same functionality with the multi-pools
- 1
-
i found the key download link in my mail, so i can retrieve that key, but cannot find the flash drive..
Spencer from Unraid also answered to my mail stating that i may have to use a completely new drive instead.
so here we go, thank you my dumb brain
as these sandisk ultra mini drives get fairly hot i think i might get a bigger one with metal-body this time - any suggestions?
thank you for your support
-
ok i think i found my issue but, have no explanation
at some point i might have ordered a replacement of this stick to another one, which i never used (!)
the problem now is, that i don't even have the other stick any more..
is there any way to get the flash drive un-blacklisted?
-
hi there,
so I have the same issue now that I've upgraded to 6.9.0 release just moments ago.
I use the same flash drive since 2 or more years for my server and have not given it to someone else..
in parallel to this post I've used the "contact the unraid team"
-
sry, did not expect to get a comment so fast..
I will give that a try and report back.
thanks!
[Support] ich777 - Application Dockers
in Docker Containers
Posted
hi @ich777,
i think i have the same problem
i noticed an error message right before the app-selection-screen:
could that have something to do with the error?
could this be a user-rights issue?
to answer your questions:
i have a cache drive; the appdata share is set to prefer the cache drive; in all docker templates the path points to the cache directly e.g. /mnt/cache/appdata/..
here are screenshots from the prefill-container:
from lancache:
and lancache-dns:
please let me know if you need any more information to analyze the error, i'd love to help
thank you!
regards - d8