der8ertl

hi @ich777, i think i have the same problem i noticed an error message right before the app-selection-screen: could that have something to do with the error? could this be a user-rights issue? to answer your questions: i have a cache drive; the appdata share is set to prefer the cache drive; in all docker templates the path points to the cache directly e.g. /mnt/cache/appdata/.. here are screenshots from the prefill-container: from lancache: and lancache-dns: please let me know if you need any more information to analyze the error, i'd love to help thank you! regards - d8

hmm.. can i check this within the script? so that it runs daily, but if it sees its friday, or first day of the month, then exit? I'm not an expert, I've just copied @mgutt's backup-script (thank you!) and changed it a little thanks in advance!

ok what now? does that mean, i cannot use this? neither 0 1 2-31 * 0-4,6 nor 0 1 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 * 0,1,2,3,4,6 is working but i really would like to exclude fridays (backups of some vms from a different host roll in) and the first day of the month (monthly parity check) with this setting. any other suggestions?

Hi again, so, it took me a while, but unfortunately it does not work.. is that cron setting general to complicated, to long, or can there be something wrong on my system? can I provide any additional information for analysis? thanks in advance!

i will give it a try and report back thank you!

Hi, thank you for this great plugin. i've been playing around with custom cron settings. unfortunately i cannot get it to run with "0 1 2-31 * 0-4,6" (run at 1:00, from 2nd to 31st day of month, each month, sun to thu and sat of week) i've used https://crontab.guru/ to generate this is this a bug or a feature 😘 any help will be appreciated thank you!

i know this is an old topic, but is there any news about nfs 4? i really don't want to run a docker (like in the workaround menationed above)

so thank you again @JorgeB for the suggestion, the method seems to work and i have already rebuilt two disks with it my data seems alright

danke leute für die lösungsvorschläge -> die lösung aus meinem englischen post scheint zu funktionieren, zwei disks wurden damit schon wiederhergestellt und die enthaltenen daten scheinen korrekt

ich hab nicht gesagt, dass sie nicht funktioniert 😜

adaptec asr-6805e die wäre jetzt günstig zu haben, falls wer interesse hat 😉

ungeduldig wie ich bin hab ich auch im englischen forum gepostet: es scheint als gäbe es eine methode per rebuild von emulierten daten ich versuch das grad, geb dann noch bescheid

thank you for the other thread i already tried unassigning and looking on the emulated data, it looks correct so i am now rebuilding one data disk with the method described there i will report back

hello there i've already tried to search, and there are similar topics, but none fits my issue then I've also already postet in the german support section, but it seems not the right spot because nobody seems to be able to help (I'm very sorry that I'm this intrusive) here is my other post with also included diagnostics: my unraid server had a pcie sas raid card which i replaced with a sas hba, the affected disks were connected as jbod on the raid card which is to my knowledge the same as a hba does (?) now i have the problem, that all my array disks show up as "Unmountable: Unsupported partition layout" what i've already tried: mount the disks with unassigned deviced plugin -> works, filesystem xfs is recognized and i can see my data xfs repair in maintenance mode with -L flag -> does find the superblock and clears a log (?), but unfortunately disks stay unmountable i've testet this prior with one single drive of the array, checked if the data is ok with "ud" plugin and started up the array, this one drive was then mountable unfortunately, after i performed the actions on the other drives, the status of them does not change and the one drive which has functioned, is now showing up as "Unmountable: not mounted" i am at the end of what i was able to find and as my knowledge of linux and therefore unraid is very limited as i am a windows user i hope that someone here can help me get my data back thanks in advance! ~d8

hallo helferlein ich habe über die suchfunktion bereits ähnliche themen gefunden, jedoch passt keines auf mein problem ich habe bei meinem unraid server einen neue gebrauchte pcie hba karte eingebaut und damit eine raid karte ersetzt. die betroffenen disks waren zuvor an der raid karte im jbod modus angeschlossen, jetzt mit der haba karte gibt es ja keine einstellung sondern es werden einfach alle disks direkt ans os übergeben (denke ich) jetzt habe ich das problem dass alle meine array disks als "Unmountable: Unsupported partition layout" angezeigt werden. was ich bereits versucht habe: - mount mit unassigned devices plugin: -> funktioniert, das dateisystem wird als xfs erkannt, ich kann alle daten sehen - xfs repair im maintenance mode über gui mit -L option -> keine statusveränderung, die disks bleiben (nach array stop und normal start) unmountable, erneuter test mit unassigned devices: ok ich habe diesen vorgang erst mit nur einer disk getestet, die konnte dann sogar wieder gemounted werden, also habe ich alle anderen disks gleich behandelt die erste disk wird jetzt jedoch "Unmountable: not mounted" angezeigt da ich als windoof user ein linux (und damit auch unraid) nackerpatzl bin brauche ich jetzt eure hilfe anbei noch meine diagnostics danke jetzt schon mal!! ~d8 titan-diagnostics-20210709-0824.zip

ich hab auch den linuxserver.io nextcloud container laufen und bekomme die integrierte version nicht zum laufen, also hab ich auch wie im video von spaceinvader versucht einen stand-alone container für den document server zu installieren erst den originalen über dockerhub (selbst konfiguriert nach dem beispiel im video) - proxy ist mir nicht gelungen jetzt den von chvb - blöderweise schaffe ich es auch damit nicht reverseproxy zum laufen zu bringen kann mir da jemand helfen? danke! grüße, d8

hallöllö schau dir als einstieg vielleicht mal das video zur onlyoffice/nextcloud integration von spaceinvaderone an

is there any progress on this? I have also tried to get it to work in a similar way, but no success.. if anyone has a working proxy config for swag, please share thanks a lot!

this sounds awesome!! maybe binhex would like to also prepare a plugin or docker for the client side 🥰? I would appreciate!

wanted to bring that up again: +1 if not LT, maybe there is an interested comunity developer? the snapshots are not only interesting for the vms, but also for general btrfs, since we can use multiple pools now take me for example, i have a raid5 pool of 5 hdds with most my live date (i know raid 5 and 6 are experimental) and would love to take controlled snapshots via a gui (i am not so familiar with console on not windows os, sry) greetings from vienna

+1 for this as unbalance was able to utilize the "old" cache drive, it would absolutely make sence (also for me ) to have the same functionality with the multi-pools

sry, did not expect to get a comment so fast.. I will give that a try and report back. thanks!

hi guys and girls! first of all: thank your for the plugin, really makes things easier generally love the community now i have some questions: in wich order does the backup-task stop and start the docker containers? the reason for my question: in the past, i've noticed some strange things happen to nextcloud, if it's connected to a maria-db container. if the maria-db will be stopped before nextcloud, it could happen that after the restart nextcloud runs into a system-error and needs to be reinstalled. I've had that a couple of times and it cost me nerves and hair.. Is there someone else maybe with this experience? is there any advice you can give me? at the moment i've excluded mariadb and nextcloud from backup from beeing shutdown, but if I understand correctly this could lead to more issues and also files which beeing accessed not beeing backuped. thanks in advance! d8

Hi, I don't know if anyone has successfully used the lancache-bundle docker for wsus, at least I couldn't find any "how to" so could anyone please help me? what are the correct settings for the clients? or do I even need to set something? I would assume, that I have to tell the windows client where the wsus server is (?) thanks in advance! 8ertl

i know, this is an old topic, but does anyone have experience with esxi 7.0? i tried to create a vm for testing on one of my unraid boxes, with the mentioned settings, but during installation i get an error that it cannot find any ethernet adapter. thx