Lunch

Anyone else having issues with Windows 11VM's with this board? Its been a right pain in the A**e for me and just hangs using a 6600XT I put in the system

Roger ok will do. Im currently in safe mode doing a parity check just to fully make sure disks seem ok(Have had to do a lot of hard resets since this issue came up. NB I have also changed maclan to ipvlan as fix common problems came up with that as a possibility too, sadly changing and then restarting machine hasnt appeared to stop these shutdowns And im typing this on my windows VM that has survived the night over here in Australia A OK

Tried this and still no dice

Hi all I've been having this bizarre and frustrating issue for maybe the last few weeks. As I said in the title, the vm launch crashes the server...it goes unresponsive and nothing loads so I have to hard reboot...sometimes is minutes, sometimes a cpl hrs after the vm is launched However.....i can launch in safe mode ie no plugins, and it works with and without the vm started. I can't share logs because it suddenly crashes and I lose it all....ive sat there with the logs open and at 1%, and all seems fine, then caput Ive tried this on 6.11.5, 6.12.1, and 6.12.3 but same issues As I said I don't believe I can get diagnostics in this instance? I guess at first I'm looking for maybe some advice.....what to look for? I'm assuming it must be a plugin but I have not many installed and those I do are mainly the mainstream ones..... Thank you for reading this cry for help all!

How'd you end up with this issue? Mine on 6.11.5 has been working fine for almost 2 years but now seems to crash when I start my windows 10vm. However if I restart in safe mode with no plugins it seems to run fine....so I guess it may be a rogue plugin that is causing the issues

Hey Flash size is only 4GB Imation drive. Ram I've got 2 x 8, so 16GB total. The RC updates have aall been great for me My main server also had issues with 2 of the earlier RC so I rolled them back because some buttons would not work and were unselectable specifically the individual start buttons for any VM or docker...but I could click the start all and then stop individual ones but not ideal...I'll probably try the new stable release to see if thats been ironed out too as I didnt see anyone else with those issues, and its a much more powerful server that one

Updated my test/cctv server from 6.12.6RC to stable and have lost all plugins, and my Frigate instance wont start as a result. Is it an expectation that we'd have to reinstall plugins? Have reverted to the previous RC for now as late and dont want to lose camera AI overnight

OK, further to before, Ive finally managed to get my Quaddro P600 as HW accel. Ive got a Coral on order coming in next week or two so I wont be doing case B. I just wanted to again say thanks so much for your help on here for myself and many others. I know you werent Frigate creator, but massive kudos to you for all that you've done in the support for us

OMFG I am a goose...I was looking for the Extra PArameters section at the bottome where you can add a device, path etc...what a fool I am so sorry, I havent progressed yet as have the kids on school holidays but now I know a 1% more than I did before, sorry for you having to talk to me as if I was a pre-teen! Thanks again Yayitazale(and Flubster!)

Could you please post a pic of your config with the extra parameters part. Now whenI set it up and then in Frigate console write nvidia-smi all i get it: sh: 1: nvidia-smi: not found yet the nvidia plugin is installed and my GPU has its identifying code from there in the config too...this is so frustrating

Hey sorry Flub, was this extra parameters BEFORE we list the individual cameras in the config, ie after putting in the mqqt settings? Im getting so many red herrings at the moment I getting very confused....so near yet so far?!!!

Flub...love that name lol Thanks so much bud will be trying all this asap...and will report back...thanks so much bud!

Thanks mate! I will try tmrw as run out of time tonight with family commitments...I know its not you as the developer but I am also aware of just hoe much work you do so to you both I am so grateful for!

Bud its in Frigate itself...and if you want to watch back in home assistant al you need is the Frigate Proxy linked to your main Frigate entity wherever it is on your home network

I have read through to the best of my(layman!) knowledge, but the old format hardware accel presets....they're at frigate.video under hardware acceleration in the documentation so I assumed these were right? Hi there, thanks for taking the time, to be honest Case A would have been fine, case B even better...Ive replied under each of your line replies to make it easier Thanks again for your support, and this amazing software! Gareth

OK, well I tried adding that to the top, and unfort i wont even load up at all now(I also removed the individual qsv commands under each camera)

Yes sir! And re your second reply I will try again now as didnt want to run before, and will report back. Thank you very much for your help

ok, so I have now got Frigate 12 setup and running. working fine so far, have added the Nvidia P600 in the template with its ID, yet to put in config. Whereabouts and what do I write for it? Ive run ffmpeg -decoders | grep cuvi And my results as below, but I am still confised where I add the P600 to the config and what exactly it should read Am I right in thinking I should have this, at the start of my config under my MTQQT broker login details?: ffmpeg: hwaccel_args: preset-nvidia-h264 assuming thats the decoding I would like done on my cameras? Below is my results of the console command ffmpeg -decoders | grep cuvi: ffmpeg version n5.1-2-g915ef932a3-20220731 Copyright (c) 2000-2022 the FFmpeg developers built with gcc 12.1.0 (crosstool-NG 1.25.0.55_3defb7b) configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-ffbuild-linux-gnu- --arch=x86_64 --target-os=linux --enable-gpl --enable-version3 --disable-debug --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --enable-libpulse --enable-libvmaf --enable-libxcb --enable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-libdav1d --enable-libdavs2 --disable-libfdk-aac --enable-ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable-libass --enable-libbluray --enable-libjxl --enable-libmp3lame --enable-libopus --enable-mbedtls --enable-librist --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libmfx --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-librav1e --enable-librubberband --disable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libdrm --enable-vaapi --enable-libvidstab --enable-vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable-libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags=-pie --extra-libs='-ldl -lgomp' --extra-version=20220731 libavutil 57. 28.100 / 57. 28.100 libavcodec 59. 37.100 / 59. 37.100 libavformat 59. 27.100 / 59. 27.100 libavdevice 59. 7.100 / 59. 7.100 libavfilter 8. 44.100 / 8. 44.100 libswscale 6. 7.100 / 6. 7.100 libswresample 4. 7.100 / 4. 7.100 libpostproc 56. 6.100 / 56. 6.100 V..... av1_cuvid Nvidia CUVID AV1 decoder (codec av1) V..... h264_cuvid Nvidia CUVID H264 decoder (codec h264) V..... hevc_cuvid Nvidia CUVID HEVC decoder (codec hevc) V..... mjpeg_cuvid Nvidia CUVID MJPEG decoder (codec mjpeg) V..... mpeg1_cuvid Nvidia CUVID MPEG1VIDEO decoder (codec mpeg1video) V..... mpeg2_cuvid Nvidia CUVID MPEG2VIDEO decoder (codec mpeg2video) V..... mpeg4_cuvid Nvidia CUVID MPEG4 decoder (codec mpeg4) V..... vc1_cuvid Nvidia CUVID VC1 decoder (codec vc1) V..... vp8_cuvid Nvidia CUVID VP8 decoder (codec vp8) V..... vp9_cuvid Nvidia CUVID VP9 decoder (codec vp9) # Id be so very grateful for someone with more of an idea to help point me in the right direction, I honestly dont want spoonfeeding I feel Im very close to finishing this off to how Id like it, so please spare a few mins to give me a hand if at all possible Thanks all

Afternoon all (cross posted late from a Reddit post but with further details) Hello my fellow Unraiders. Recently moved over from Blue Iris in a windows 10 VM in (Unraid 6.10.3 should that matter) to Frigate....OMFG it's just incredible, with deepstack(not convinced yet) double take and compreface(wow again) but my CPU is taking a bit of a hit as Im also using it for various other things Plex, RR's, Windows gaming VM etc etc so... I've reinstalled my old Quadro p600 but cannot for the life of me see where I'm supposed to add it to the config file as well as the unraid docker template (assuming this needs to be done)....I'm Using Frigate 11 currently(yes I have seen the move but Id like to gedt this working 100% before I then delve into that if at all poss...I'll add my botch job config file here if I may, removing the sensitive stuff of course....Id just like to confirm do I edit the config adding a GPU device line and/OR I read something about GPU=all and that's confused me somewhat. Secondly what and where would I put the Quadro GPU info into the config? Ive downloaded the Nvidia GPU plugin to get the ID of that GPU, but Im unsure from there where to go.....and again to the maker/contributor of Frigate....words cannot express enough this is amazing software, and I plan on contributing for sure...after all I paid a fair chunk of change for Blue Iris and it is not anywhere near the standard of Frigate! Anyway my config(using my 11900 Igpu at moment only): mqtt: host: 192.168.1.XX user: homeassistant password: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX cameras: front: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://XXXXX:[email protected]/live roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10 entrance: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://admin:[email protected]:554/onvif1 roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10 back: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://XXXXX:[email protected]/live roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10 patio: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://admin:[email protected]/ roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10 carport: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://admin:[email protected]:554/h.265 roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10 backyard: ffmpeg: hwaccel_args: -c:v h264_qsv inputs: - path: rtsp://admin:[email protected]:554/h.265 roles: - detect - rtmp - clips - record detect: width: 1280 height: 720 fps: 10 objects: track: - person - dog - cat - car - bike - motorcyle - bus filters: person: threshold: 0.8 min_area: 5000 max_area: 100000 record: enabled: True retain: days: 5 mode: all events: retain: default: 10

Hi all Reposting with the zip error on this drive...I'll start a disk rebuild in disk 10 which is disabled which runs for a couple of hours it feels like before then I come back to check on progress and it's paused. I unpause it and it changes to a parity read check.....I'm clueless re the log so hoping some good person can have a look for me to help guide the way thanks all! tower-smart-20221010-0024.zip

Ah apologies I thought it would have been best not to post zip. I'll do that then in a seperate post now if I can

Worked out how to get from my phone.....lots of errors it looks like....could it be worth swapping out cables or just give up on the disk? I don't think it's more than 18-24 months old though...

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.46-Unraid] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate BarraCuda 3.5 (CMR) Device Model: ST10000DM0004-2GR11L Serial Number: ZJV6ATFM LU WWN Device Id: 5 000c50 0c43ae733 Firmware Version: DN01 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5387 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 10 00:25:05 2022 AWST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 853) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 064 044 - 62905016 3 Spin_Up_Time PO---- 094 088 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 786 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 088 060 045 - 624952434 9 Power_On_Hours -O--CK 090 090 000 - 9391 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 382 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 190 Airflow_Temperature_Cel -O---K 059 042 040 - 41 (Min/Max 41/52) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 380 193 Load_Cycle_Count -O--CK 095 095 000 - 11155 194 Temperature_Celsius -O---K 041 058 000 - 41 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 078 002 000 - 62905016 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Pressure_Limit PO---K 100 100 001 - 0 240 Head_Flying_Hours ------ 100 253 000 - 8404h+12m+24.435s 241 Total_LBAs_Written ------ 100 253 000 - 251417688050 242 Total_LBAs_Read ------ 100 253 000 - 622520926960 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 768 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 16320 Device vendor specific log 0xa4 GPL,SL VS 160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 8 Device vendor specific log 0xc3 GPL,SL VS 32 Device vendor specific log 0xc9 GPL,SL VS 8 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd1 GPL VS 336 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 00% 9389 - # 2 Extended offline Interrupted (host reset) 00% 9389 - # 3 Short offline Completed without error 00% 9388 - # 4 Short offline Completed without error 00% 9355 - # 5 Short offline Aborted by host 10% 9355 - # 6 Extended offline Completed without error 00% 7988 - # 7 Short offline Completed without error 00% 7913 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 41/52 Celsius Lifetime Min/Max Temperature: 17/58 Celsius Under/Over Temperature Limit Count: 0/2 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 10/40 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2022-10-04 18:35 47 **************************** ... ..( 2 skipped). .. **************************** 89 2022-10-04 21:32 47 **************************** 90 2022-10-04 22:31 46 *************************** 91 2022-10-04 23:30 ? - 92 2022-10-05 00:29 37 ****************** 93 2022-10-05 01:28 ? - 94 2022-10-05 02:27 37 ****************** 95 2022-10-05 03:26 ? - 96 2022-10-05 04:25 41 ********************** 97 2022-10-05 05:24 44 ************************* 98 2022-10-05 06:23 44 ************************* 99 2022-10-05 07:22 44 ************************* 100 2022-10-05 08:21 47 **************************** 101 2022-10-05 09:20 49 ****************************** 102 2022-10-05 10:19 45 ************************** 103 2022-10-05 11:18 ? - 104 2022-10-05 12:17 47 **************************** 105 2022-10-05 13:16 ? - 106 2022-10-05 14:15 48 ***************************** 107 2022-10-05 15:14 ? - 108 2022-10-05 16:13 48 ***************************** 109 2022-10-05 17:12 ? - 110 2022-10-05 18:11 48 ***************************** 111 2022-10-05 19:10 ? - 112 2022-10-05 20:09 47 **************************** 113 2022-10-05 21:08 ? - 114 2022-10-05 22:07 48 ***************************** 115 2022-10-05 23:06 ? - 116 2022-10-06 00:05 48 ***************************** 117 2022-10-06 01:04 44 ************************* 118 2022-10-06 02:03 44 ************************* 119 2022-10-06 03:02 ? - 120 2022-10-06 04:01 41 ********************** 121 2022-10-06 05:00 ? - 122 2022-10-06 05:59 44 ************************* 123 2022-10-06 06:58 ? - 124 2022-10-06 07:57 41 ********************** 125 2022-10-06 08:56 ? - 126 2022-10-06 09:55 41 ********************** 127 2022-10-06 10:54 ? - 0 2022-10-06 11:53 40 ********************* 1 2022-10-06 12:52 ? - 2 2022-10-06 13:51 41 ********************** 3 2022-10-06 14:50 ? - 4 2022-10-06 15:49 42 *********************** 5 2022-10-06 16:48 43 ************************ 6 2022-10-06 17:47 45 ************************** 7 2022-10-06 18:46 43 ************************ 8 2022-10-06 19:45 42 *********************** 9 2022-10-06 20:44 42 *********************** 10 2022-10-06 21:43 43 ************************ 11 2022-10-06 22:42 42 *********************** 12 2022-10-06 23:41 41 ********************** 13 2022-10-07 00:40 41 ********************** 14 2022-10-07 01:39 43 ************************ 15 2022-10-07 02:38 46 *************************** 16 2022-10-07 03:37 49 ****************************** 17 2022-10-07 04:36 51 ******************************** 18 2022-10-07 05:35 52 ********************************* 19 2022-10-07 06:34 ? - 20 2022-10-07 07:33 53 ********************************** ... ..( 2 skipped). .. ********************************** 23 2022-10-07 10:30 53 ********************************** 24 2022-10-07 11:29 52 ********************************* 25 2022-10-07 12:28 53 ********************************** 26 2022-10-07 13:27 51 ******************************** 27 2022-10-07 14:26 51 ******************************** 28 2022-10-07 15:25 51 ******************************** 29 2022-10-07 16:24 50 ******************************* 30 2022-10-07 17:23 50 ******************************* 31 2022-10-07 18:22 51 ******************************** 32 2022-10-07 19:21 50 ******************************* 33 2022-10-07 20:20 51 ******************************** 34 2022-10-07 21:19 50 ******************************* 35 2022-10-07 22:18 50 ******************************* 36 2022-10-07 23:17 49 ****************************** 37 2022-10-08 00:16 49 ****************************** 38 2022-10-08 01:15 49 ****************************** 39 2022-10-08 02:14 48 ***************************** 40 2022-10-08 03:13 46 *************************** 41 2022-10-08 04:12 47 **************************** 42 2022-10-08 05:11 47 **************************** 43 2022-10-08 06:10 ? - 44 2022-10-08 07:09 47 **************************** 45 2022-10-08 08:08 39 ******************** 46 2022-10-08 09:07 39 ******************** 47 2022-10-08 10:06 ? - 48 2022-10-08 11:05 46 *************************** 49 2022-10-08 12:04 ? - 50 2022-10-08 13:03 47 **************************** 51 2022-10-08 14:02 ? - 52 2022-10-08 15:01 49 ****************************** 53 2022-10-08 16:00 ? - 54 2022-10-08 16:59 51 ******************************** 55 2022-10-08 17:58 43 ************************ 56 2022-10-08 18:57 ? - 57 2022-10-08 19:56 45 ************************** 58 2022-10-08 20:55 52 ********************************* 59 2022-10-08 21:54 52 ********************************* 60 2022-10-08 22:53 52 ********************************* 61 2022-10-08 23:52 ? - 62 2022-10-09 00:51 52 ********************************* 63 2022-10-09 01:50 ? - 64 2022-10-09 02:49 52 ********************************* 65 2022-10-09 03:48 ? - 66 2022-10-09 04:47 52 ********************************* 67 2022-10-09 05:46 ? - 68 2022-10-09 06:45 52 ********************************* 69 2022-10-09 07:44 ? - 70 2022-10-09 08:43 52 ********************************* 71 2022-10-09 09:42 ? - 72 2022-10-09 10:41 52 ********************************* 73 2022-10-09 11:40 ? - 74 2022-10-09 12:39 52 ********************************* 75 2022-10-09 13:38 ? - 76 2022-10-09 14:37 52 ********************************* 77 2022-10-09 15:36 ? - 78 2022-10-09 16:35 51 ******************************** 79 2022-10-09 17:34 40 ********************* 80 2022-10-09 18:33 41 ********************** 81 2022-10-09 19:32 ? - 82 2022-10-09 20:31 52 ********************************* 83 2022-10-09 21:30 ? - 84 2022-10-09 22:29 52 ********************************* 85 2022-10-09 23:28 42 *********************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 382 --- Lifetime Power-On Resets 0x01 0x010 4 9391 --- Power-on Hours 0x01 0x018 6 251078555250 --- Logical Sectors Written 0x01 0x020 6 580927355 --- Number of Write Commands 0x01 0x028 6 622015051578 --- Logical Sectors Read 0x01 0x030 6 1247454340 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3023792512 N-- Spindle Motor Power-on Hours 0x03 0x010 4 3023792388 N-- Head Flying Hours 0x03 0x018 4 11155 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 380 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x010 1 47 --- Average Short Term Temperature 0x05 0x018 1 43 --- Average Long Term Temperature 0x05 0x020 1 58 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 53 --- Highest Average Short Term Temperature 0x05 0x038 1 28 --- Lowest Average Short Term Temperature 0x05 0x040 1 45 --- Highest Average Long Term Temperature 0x05 0x048 1 34 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 1694 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 554 --- Number of Hardware Resets 0x06 0x010 4 230 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x008 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS

Will do, at work overnight now so can't do until tomorrow, thanks

So, as above, running 6.10.3 and I saw I had a disk disabled so I checked the connections after powering down, ran cpl of the smart tests, and all appeared fine. So I followed the guide of stopping the array, removing the disk from the list, restarting/stopping and then re-adding....it sees it as a replacement disk and starts the parity rebuild but then after some hours, I come back to the server page and it has paused. The 10tb drive rebuild has paused, and if I unpause it, it comes up with my 14tb parity check.....I cannot see this behaviours anywhere else, I'm not sure if it's an error on my part or.....? Please help I've tried this a few times and keeps doing the same thing! Will cross post with Unraid forums too in the hope I get some help