cristiano1492

Acutually not, but I can provide, is not a problem. Which are the next steps ? Taking in consideration, that i was never able to passthorugh a videocard...that's why I stopped to use the server, because my first goal was to use virtua machine. Now , since i bought a 1080TI, i would try this card, that i knew spwceinvaders were using with success. thx

Hi Frank, tried, but still doesn't work. I wrote to the support...and hope they can help me to get rid of this bad situation

Hi Frank, well....ehhhh....yeah...it could be...ok....let me try and I'll let you know.... Really thankful for your prompt answer.

dears, after a year, probably more.... I turned on again my server. As a bad surprise it seems that I can't access it anymore. I had reserve a ip address on my router, and scanning my device connected i can see it, and its ip address, but despite of that I can't access it. Login into my server application on me server appear a nice Red cross, and I don't know ( or don't remember ) what I could do to reach out my server. Is there anyone that can help me with this ( I'm sure ) very basic personal mistake ? THX

Hi guys, I have the same issue with a new brand 3060Ti : Blank screen and/or at least seems that the VideoCard didn't work. I just tried to create the script mentioned bu Spaceinvaders, but, at least for me, this script didn,t work as it might be. - It's stuck to the line where it says to restart the server. I did it...the server re started, but the script didn't go over Two more questions: - in the tutorial the script recognize which kind of card is installed, in my case the system didn't show any card ( just a general nividia card ). What I did worng ? How can I let the system to recognize which card is installed ? - Did the script create on his own the dump file ? Or do we have to tell the system where the .rom file is located ? I would really love to understand why my brand new card can't work and/or is not recognized. THX Any supoort is more than welcome

well, man, you have to be really patience with me, because if there something more than a newbie.... then I'm even newbier.... :o))) you gave me a lot of advices, but not sure to get the full meaning....then, if you you is not a problem, pls...pls..slow down, and image to have in front of you a.... baby....veery baby... :o)). Well, let me try to clarify my doubts : - creating a VM Win 10 following the Spaceinvader tutorial is ...let's say easy... I already did some attempts with success.... VM were created, with VNC drivers and everything works fine.... untill here....ok.. - when you mention " enable remote desktop in the guest (inside the vm) " I guess you mean to add into the VM some software to remote control from outside ? Like Splashtop ? If yes, you mean that through it I could remove the VNC and replace with passthrough, chosing a Gpu or just simply set passthrough ? If I understood correctly I might be able to swap to the new card, forcing VM Win 10 to upload the drivers ? - I've tried to rename the VGA Biom file into Dump. but then in the VM edit, I'm not able to find where this file is. The only file, Unraid finds is the the original file. Tried to buid the Vm directly the the invidia gpu and his audio part, but it doesn't start. ( I was trying a shortcut, but no chance :o)) ) - The rest of screens you showed, are not so easy to understand from my side, therefore I'm not going to ask you further questions on those, because I don't want to overload you too many questions. My purpose is to be able to create a Vm that can work with my new ( and quite expense, I would say ) gpu card....but following several tutorial didn't give the chance to be sucessful on this side. I really appreciate your help, because is like a hand in a ocean storm...and i really would like to understand where I'm wrong. Unfortunately Spaceinvader make a lot of tutorial, but never answered to questions...and this ....doesn't help so much.... Thx Hoping to hear you soon

Hi Ghost82, first, thanks for your answer and suggestions. - Ok, for Apple, I won't use the 3060.... got it ? Any other card could work ? perhaps a little bit older ? like a GTX 760 ? - Yes, I'm speaking about a Win WM. you see the two parts of the card are in group different, and this should be the best option, according to the several tutorial I saw ( is it correct ? ) - How can I install drivers ? Do you mean to put in the VM configuration the ROM file of the card ? is that you meant ? If yes, can I leave extension as ROM file or should I rename somehow ( as I saw in a Spaceinvaders tutorials on VM ) ? THx a lot for helping me

Hi community, I beg your help, because I'm not able to understand where is the problem. Just bought a nvidia 3060TI, installed. Connected the HDMI cable to my monitor. I know that is works, because I can see all the bootup process running on the screen. But whn I go to "System devices" I can't see my brand new card. I just saw an anonymous : " 01:00.0 VGA compatible controller: NVIDIA Corporation Device 2489 (rev a1) " but not the name of the new card. Tried to install the nvidia plugin but still I don't see any clear indication of the new card but I got this message : "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. " Tried to install either the latest version and the production one's and refreshed every tim. About this I understood that nvidia plugin it doesn't wok for Vm, therefore I removed the plugin. At any change I rebooted the server. In the " settings " I put into the " PCIe ACS override" : " both " as option, no results and still not able to passthorugh my GPU in the VM. I have a Apple VM installed, tried to set the nvidia card wjth the one mentioned ( 01:00.0 VGA compatible controller: NVIDIA Corporation Device 2489 (rev a1) ) update the settings with the no warnings, but when I start the VM, the screen is still blank. Is there someone that is able to give me some indicatiions ? Should I hve to install the ROM file ? ( I didn't in this case, because I saw on youtube some tutorial where they didn't do and were able to passthorugh in any case ) In case should i leave the extension as *.rom or should I rename it ? In case the file has to be in the same folder where I keep the ISO's ? btw : I'm newbie on unraid, therefore all the suggetions are more than welcome THX really appreciate your support

Hi and thanks for your answer Well, basically as a newbie, I would to use my GPU for VM, mainly, but could be that I would even use for dockers ( thinking to plex, mainly ) Then question is : can be right keep the plugin for both uses ? If not, my primary goal is VM, then, if I have to remove, I wll Can you tell me what do you mean about ABOVE 4G Decoding ? Where I could find this option in the BIOS menu ? THX a lot

Hi community, I beg your help, because I'm not able to understand where is the problem. Just bought a nvidia 3060TI, installed. Connected the HDMI cable to my monitor. I know that is works, because I can see all the bootup process running on the screen. But whn I go to "System devices" I can't see my brand new card. I just saw an anonymous : " 01:00.0 VGA compatible controller: NVIDIA Corporation Device 2489 (rev a1) " but not the name of the new card. Tried to install the nvidia plugin but still I don't see any clear indication of the new card but I got this message : "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. " Tried to install either the latest version and the production one's and refreshed every tim. At any change I rebooted the server. In the settings I put into the " PCIe ACS override" : both as option but still not able to run VM. I have a Apple VM installed, tried to set the nvidia card, update the settingd, no warnings, but when I start the VM, the screen is still blank. Is there someone that is able to give me some indicatiions ? btw : I'm newbie on unraid, therefore all the suggetions are more than welcome THX really appreciate your support

hi community, I have a couple of questions for you. I'm running the latest version next of Unraid ( Version: 6.9.0-rc2 ) and I took the advantage to create a second pool device and I put inside a NMVe disk ( 1TB ). The idea was to allocate my VMs on it, and I did the first one, according to the edit you find attached. It works. If I understood correctly, if I leave AUTO the Primary vDisk Location, is gonna to put in Domain, that it should be on cache ( /mnt/user/domains ), btw : is correct ? My idea, instead, was to leave chace free for the classical purpose ( move files to array ), then, instead of AUTO, I put manual and I create a different location : /mnt/vm/Windows 10/vdisk1.img ( where vm is the name of the second pool ). Now, at the moment I want to create a second ( or multiple ) VM, I put it still on the same path, but i wrote vdisk2.img to not overwrite the first one. When I tried to save it I have got this error and no chance to create the second one. Where am I wrong ? Which is instead the right way to have multiple VMs on this NMVe disk ? Apologize for these basic questions, but I'm a beginner in Unraid . Thx for whoever wants to help me in better understanding and to find the solution BR

Hi guys, trying to install nextcloud. Installed and setup MARIADB to work with installed Nextcloud docker tried to open the GUI and I got an internal server error removed the docker and re installed again, reboot the server, but the problem is still there. No idea why is happening here the screenshot with the error statement Any suggestion ? thx a lot

Buoasera, per caso vi è mai capitato che avviando exnovo il docker nextcloud apparisse errore "internal server error" e non ci fosse modo di uscirne ? Già cancellato e reinstallato il docker. Già settatto MariaDB. Grazie mille

Hi guys, tried to install your Krusader, and following SpaceInvader indication, but the settings pages are different and perhaps I've made some mistakes. However the docker was installed, but in the GUI I don't see the same details Space was shown and if I go into some folder ( for instance FLASH ) it doesn't show anything. Any suggestions on how to fix all these issues ? - are the settings corrects ? - the version showed in the Spaceinvaders is different, especially regarding the KEYS that in the video are not mentionign and not with such a numeber of them, however I left them untouched - in the setting the line "the Webpage title " : is as default named TOWER. Is the name of the server ? I left it, but to be clear, my server has a different name, should I change it ? - Why I can't see UNRAID FOLDER ? The main issue it that I would move file onto some share folders, but since I don't see them, I can't. Any suggestion on it ? THX for your kind support Attacched some screenshots