Rolucious

Is there a way to have it automatically restart the container, if there is a new game update? I frequently get that my friends want to play, but have a server mismatch and I have to manually restart the container. If I'm going away on a trip that would mean that can't play for a while.

I have installed one instance for quite some time now and it has been working smoothly. This morning I installed a second instance. I notice that if I enable the Voice Chat ("enableVoiceChat": true,), the server for whatever reason doesn't show up in the Enshrouded server list. If I change it back to false, it still doesn't appear and I have to remove the enshrouded_server.json, restart, copy all the settings from the old and restart again. I really have no clue why I need to go through the effort of starting fresh with the config, or more importantly, why it would disappear from the server list. The "enableTextChat": true, works fine

Is it possible to place the entire script that you're running? Ive adjusted the old with the new code, but when I run it, I only see that its trying to identify the HDD's. I have my docker turned off and parity spun down, but I don't know how it 'should' look like. I see not read/writes on the drives either.

Wow that was much easier than I initially expected when I red the documentation. Thank you for the help!

Could you explain where you changed these lines for the nginx config? There are so many files, that I don't know where to look. I tried copying the files to the right location and renaming it, but then it just started giving errors. So I hope adjusting the path will help

Did you find a solution to this? I tried using qbit manage, but it seems it gives an incorrect output. I red somewhere that the hardlink in unraid work a bit different than other os'es

You are correct. I mean the 460.73.01. I am running 6.9.2, but that version is not currently listed in the available driver downloads. What can I do to download and install it anyway?

Is there a way to download an older driver, that isn't listed in the options? I want to use the 460.73 driver. I'm using nsf miner for ethereum mining, while running a plex docker in the background. The older driver is the only way I know how to get the overclocking of the gpu to work. Since the nsfminer docker isn't supported anymore, I was hoping to stick to the older driver,while figuring out a more future proof solution.

I updated the driver in the nvidia pluging to 465.27, but that caused nvidia-smi to not properly report the GPU's for some reason, resulting that the cards weren't able to overclock. In the end the only nvidia driver I found working was 460.73. It's currently working correctly

I updated the miner, but the logs state that the driver version could no be found. Log: ---Trying to get Nvidia driver version--- ---Something went wrong, can't get driver version, putting server into sleep mode--- Do I need to update all the drivers to the latest version? Currently running 460.67

Thanks, I used the command and noticed I have 8 fans. So maybe I have to use fan ID 3/4 for GPU 1, FANID 5/6 for GPU2 etc. Everything is working pretty well now, so I didn't bother adjusting it anymore. I just upgraded to unraid 6.9.2 and noticed I got the fatal server error mentioned earlier. I fixed it by adjusting something in the docker and saving it. After that it worked fine. A reboot didn't seem to work, so if anyone notices something similar, it might be worth a shot.

Tested it with a 3060ti and the HW transcoding works better. The hashrates seem a bit lower than the t-rex miner, but considering no fee I think it's worth it. Thanks again for the docker. Last question regarding the errors, sometimes I receive an error: GPU 0 gave incorrect result. Lower overclocking values if it happens to frequently. I can't see the amount of shares and rejected shares, so I'm not sure what 'to frequently' is and if I really do need to lower the settings. I used to get 63,8 MH/s (+2900 mem) with my 3060ti and now I'm getting about 62 (+2650) with that error occuring once every 10 min or so. I think the fault could lie with the fans set to auto (I get an error when set to manual, so I recon it has 3 fan controllers for each of the 3 fans), but I'm not sure. How often is okay to get the incorrect results message.

Thank you for your reaction. It seems that HW transcoding in plex doesn't work when the miner is running. I tried it with the miner on/off and as long as the miner is off, the HW transcoding in plex works. When I turn on the miner, while its HW transcoding, the DAG doesn't seem to load on the GPU. Is this normal behaviour? I am currently running a 2060, but going to install a 3060ti and 2x 1660S in the future. Maybe it will work better with 8gb memory (3060ti)?

Thank you very much for this docker. I will be mining for you for a couple of hours. Have been waiting for a while to be able to use OC settings in unraid. Always got the nvidia-settings lib6x error. Could you explain how to set the OC settings for multiple GPU's? I would expect the first setting to be like: NSFMINER_GPU: 0, 1 , 2 (for 3 graphic cards). Do i have to set the offset as follows: NSFMINER_GPUMEMCLOCKOFFSET: 1800, 3000, -1004 (with the comma separating the OC settings for each card)? Or would it be better to install this docker multiple times (would need to look it up if its possible) and adjust just the prior GPU number and workername?

I got the Trex miner working. Thank you (for people having trouble, double check that the port is included in the pool address) I was wondering if it is possible to overclock the GPU using some sort of afterburner gui software? I red that it is possible by editing the settings through a VM. But considering that this is a docker image I'm afraid of bricking the device if the GPU is used for a VM and docker.