luhzifer

So i had the case that I needed to move from btrfs - raid10 - to zfs raidz1, because I needed to remove 1 of my 4 ssd drives. Basically these were the steps i followed: stop all dockers and shutdown VMs disable docker and VM in settings copy /mnt/cache over to my array stop array disallocate cache drives to 'no device' for each slot click on the 'cache' link of the first 'Pool Devices' line and click [remove pool] create new pool with fs and raid type of your choice (I chose 'zfs-encrypted' and raidz1 with 3 devices) click on the red x on the right of each drive that goes to the pool to clear disk. This deletes the data on this disk! (THIS STEP WAS IMPORTANT AS IT OTHERWISE ALWAYS USED POOL SETTINGS FROM BEFORE) start array (it will say that cache pool cannot be used due to unmountable disks) scroll down and tick the chackbox to the right of [format] where it says that some disks couldnt be mounted due to not being formatted or so (I dont remember the correct wording here, as I don't wanna do it again ^^) now your cache pool should be online and each disk has been luks-encrypted (at least in my case). You can check that by stopping the array and disallocating a disk. Now at the 'unassigned devices' area there should be a 'luks' label in the 'FS' column. Reallocate again in cache pool after checking. move backup from array back to /mnt/cache enable docker and VM in settings As far as I can remember those were the steps that were needed in the end (after lots of trial and error). The weirdest part was that unraid always used the old cache structure - btrfs and raid10 - without clearing the disks beforehand, as it didn't reformat those by itself. I had to clear so that unraid got forced to reformat. Or I think you can manually format each disk with FS and optionally encryption of choice and then create the cache pool. Hope that helps others that have a similar case

Hey there, I somehow cannot find an answer to my needs (and maybe there is none ^^ ) So I want a friend of mine to be able to manage a Docker Container of a Game Server we use. Is there some way to achieve that? Best would be to grant access to only appdata/{gameserverdocker} and to start/stop/restart the container. Alternatively it could maybe work over ssh/scp aswell but then when we install stuff like nano and so on, we would have to redo everything after every container update, which would be a struggle... Is there something that can satisfy my special needs? 😆 Thx in advance!

thx mate, and sry for my disability to read

I get an error when installing: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='todoMini' --net='bridge' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -p '8047:80/tcp' -v '/mnt/user/appdata/minitodo/stardust.png':'/var/www/public/img/stardust.png':'ro' 'brettdocker/minitodo' 0a9527db26321aeaf7bf3fb2a2558ba59291d3b12e6ae6915bf4cb44849658c5 docker: Error response from daemon: OCI runtime create failed: container_linux.go:367: starting container process caused: process_linux.go:495: container init caused: rootfs_linux.go:60: mounting "/mnt/user/appdata/minitodo/stardust.png" to rootfs at "/var/lib/docker/btrfs/subvolumes/abfff6b0417d497b5697b1ac8cb858e97b494eca230dfda9c6f8b9b18b934232/var/www/public/img/stardust.png" caused: not a directory: unknown: Are you trying to mount a directory onto a file (or vice-versa)? Check if the specified host path exists and is the expected type. The command failed. Maybe the stardust.png should be removed by default from this field

Yes it sounds pretty much like my problems here... But I also have very little time to mess with it so I mostly use this machine while doing something else and just click from time to time I'll let you know when I find out someting.

Ok - thank you for making me a little smarter and the honor of taking care of my problems much appreciated! I will then take care of the other ones involved - maybe i'll spot the villain sometime ^^

Yes, sorry for my bad expressions 🙈 correct that's what i thought, too, but for example: If i go to speedtest dot net, the page builds up veeeery slowly but then, once the test is started, it is running at full speed. Is what i did even meaningful? Because i only entered a proxy for http/https thanks and sorry in advance 😅

yes, you're right. I forgot to mention, that i also set set deluge up as proxy in the browser's settings... tested with both, chrome and firefox. BUT: If I set Firefox to 'Use System Proxy Settings', vpn is active, Firefox is slow and it show the foreign ip when checked online If I set Firefox to 'No Proxy', vpn is inactive and Firefox is fast If I set Firefox to 'Manual Proxy Config', it's the same as 'Use System Proxy Settings'... So there must be some sort of proxy on OS level here, right?

Hey yall, i have some weird speed problems with the Proxy functionality of delugevpn... The problem is, that within my browser, everything is ultra slow, but as soon as i start a download, the speed is maxed out (speedtest maxed out aswell). Config is: Delugevpn with openVPN settings and Proxy enabled (hide.me is the provider here. I tested with different countries) Ubuntu VM with Proxy set up in system settings, so that every application uses the VPN Has anybody an idea how this can be fixed? Also, it worked well at the beginning and then switched to this mystic behavior without any changes made to the system. Thx in advance!

Hey everybody, yesterday I added two drives to my array and when I chose to use 'xfs - encrypted', unRAID didnt ask for a password... So I am wondering now, what the password has been set to. Can anybody clarify?

Ok, so after removing the .bak file, it worked ty very much

Hmm.. I did that.. but I try again tomorrow. Thx so far for your time!

is it the 'serverconfig.txt'? Don't see config.cfg Tried to change it there with no luck...

Sadly it didn't work 😪 Still same Error msg. after Container restart 'Only Non-Journey characters may enter a Non-Journey server.' I guess it won't work then - right?

Ok nice, will give it a try ty bud