Llessur

This is so cool. I love it. Just one observation. I added a TV series with Specials and Seasons 1 - 3. I requested the Specials and Season 1. Instead of the five special episodes and Season 1, I received the first special (not specials 2 through 5) and Season 2. Any idea what went wrong?

The error is "No movies found, ...". When I try to add a root folder, as shown on the Loki Shared screenshot, I don't get an option to add the share to Radarr.

I'm having issues with my configuration of Radarr. I'm looking for Host Path 3 (I believe) in order to specify where my movies are to be stored. I'm able to specify Host Path 2, where my complete files are downloaded, but not where Radarr should store the post-processed movies. I even tried going back a few levels to see if I could get the option for Host Path 2, but no luck.

Where did you see that my Influx CLI is outdated? Also, as I'm still on the learning curve on unRaid Docker, how would I go about doing the upgrade? Do I open a terminal session in unRaid or open the console prompt for InfluxDB?

I'm running unRaid V7.1.2. When I run the InfluxDB docker container, I can't see the WebUI. I'm told that the Docker refused the connection. The only error is InfluxDB says ts=2025-06-16T19:14:21.610640Z lvl=info msg="Pruning shard groups after retention check (start)" log_id=0x6q_OIl000 service=retention op_name=retention_delete_check op_name=retention_prune_shard_groups op_event=start ts=2025-06-16T19:14:21.610655Z lvl=info msg="Pruning shard groups after retention check (end)" log_id=0x6q_OIl000 service=retention op_name=retention_delete_check op_name=retention_prune_shard_groups op_event=end op_elapsed=0.017ms ts=2025-06-16T19:14:21.610675Z lvl=info msg="Retention policy deletion check (end)" log_id=0x6q_OIl000 service=retention op_name=retention_delete_check op_event=end op_elapsed=0.156ms Also, does someone have the generic telegraf.conf file. I have one that allows telegraf to stay started, but I'm not getting any data. (I tried to go look at the InfluxDB table, which is why I know that InfluxDB UI is refusing my connection.) I apologize if these are stupid noob questions, but I'm just trying to get my Grafana dashboard to work.

I have the Docker Scrutiny and the Disk Location plugin on an unRaid 6.12.14 system. Disk Location flashes black and orange on the 4 TB cache drive, but Scrutiny shows no issues. Any idea why it's flashing? Where can/should I look? I appreciate any help...

Now seeing a new error. I have the telegraf.conf in both /mnt/user/appdata/telegraf/telegraf.conf/telegraf.conf and /etc/telegraf/telegraf.conf. When I click on start, I see the circle rotating and then nothing. When I click on logs under Telegraf, I see "/bin/sh: apt: not found." When I click on Edit, I don't see anywhere that I'm doing any command line arguments or anything else that's trying to use the apt command.

As I said, I'm a noob. Try as I might, I can't figure out how to copy the telegraf.conf file in unRaid. I tried the command "cp ./mnt/user/appdata/telegraf.conf/telegraf.conf /etc/telegraf/telegraf.conf", but that gave me the error message: cp: cannot stat './mnt/user/appdata/telegraf.conf/telegraf.conf': No such file or directory but, if I enter the ls -l command, I see ls -l /mnt/user/appdata/telegraf/telegraf.conf/telegraf.conf -rw-rw-rw- 1 777 root 1529 Sep 22 16:02 /mnt/user/appdata/telegraf/telegraf.conf/telegraf.conf Looking back at the original error text, I tried executing the mount command and received the error that it couldn't be found in /etc/fstab. HELP!

No one responded, so I thought my diagnostic zip file might help. loki-diagnostics-20240923-1314.zip

I'm trying to get the InfluxDB-Telegraf-Grafana-Varken stack running again. (I had it working at one time, but it's been a while.) I have InfluxDB installed, configured, and started. However, I'm having issues with Telegraf. The error message I'm seeing is --user 0 756560a7e58b3cf4ba8bb1f0ebc8486e538b5ef247ebacbc3749852fea0fd09a docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: error during container init: error mounting "/mnt/user/appdata/telegraf/telegraf.conf" to rootfs at "/etc/telegraf/telegraf.conf": mount /mnt/user/appdata/telegraf/telegraf.conf:/etc/telegraf/telegraf.conf (via /proc/self/fd/6), flags: 0x5000: not a directory: unknown: Are you trying to mount a directory onto a file (or vice-versa)? Check if the specified host path exists and is the expected type. I have the telegraf.conf created. What am I missing?

Nevermind. I figured it out, but stick around. I may have other questions!!!!

I installed this a few months ago and it was working just fine. However, I applied an update, and it broke. I shoved this under the rug and haven't done anything with it since, but I want to get it working again. In my Unraid implementation (6.12.10), when I try to start Grafana, in the log, I see mkdir: can't create directory '/var/lib/grafana/plugins': Permission denied GF_PATHS_DATA='/var/lib/grafana' is not writable. I'm somewhat of a noob concerning permission. Can someone help me with the correct permissions for grafana/plugins?

I've solved the problem. I had to stop the array as this drive's file system was set to auto. I changed it to xfs, started the array, and saw the format button lower on the Main tab screen. I formatted, and all is good. Thanks for your help.

Phase 1 - find and verify superblock... bad primary superblock - bad magic number !!! attempting to find secondary superblock... ................................................................................................................................................. And then continues to fill the screen with dots. Is this what you wanted?

Done. loki-diagnostics-20240920-1213.zip

I'm currently on unRaid 6.12.10. I'm waiting a month before installing 6.12.13 (almost there). However, on Wednesday, I tried replacing a 4TB drive with a 22TB drive. I formatted it using XFS, and it completed successfully. However, now the array is showing that drive as "Unmountable wrong or no file system." I've run the diagnostics (attached) and have the array started in Maintenance mode. I saw where a previous forum post talked about running the command xfs_repair -v /dev/mdXX, but that returned the error "fatal error -- couldn't initialize XFS library." I'm hoping someone here can help. aTdHvAaNnKcSe (That's thanks in advance.) loki-diagnostics-20240920-0802.zip

Well, I seem to have run in to another issue with my binhex-NZBGet Configuration. I'm using the directory structure -data |- torrents |- movies |- music |- tv |-usenet |- movies |- music |- tv But I need help setting up the Settings->Path section of the configuration. Can somebody help me out here? I had it working at oone time, but an update of unRaid screwed the pooch permissions wise. I've attached the log file. supervisord.log

I don't know if it's when I updated unRaid to version 6.11.4, 6.11.5, or NZBGet, but it has stopped adding nzb files to the download queue. The error I'm seeing is "Could not create file /data/tmp/nzb-*.tmp ". My docker is set up with /mnt/user/downloads in Host Path 2, 022 as Key 1, 99 for Key 2, and 100 for key 3. My supervisord.log is attached. Let me know if you need anything else. supervisord.log

Sometime after installing unRaid 6.11.4, my NZBGET stopped working. I'm running Sonarr and Radarr, but when I try to see the available downloads, I see nothing for nzb files. Looking in the messages tab, I see "Could not create file /data/tmp/nzb-???.tmp". Is anyone aware of the unRaid install messing with the chmod settings?

Before the first of the year, my Radarr Email Connection configuration was working just fine. It stopped working 01/31/2022, around the time I applied update 4.0.4.5922. When I tried to set up the email to my smtp server, I get an error "unable to send test email". I've attached a screen shot of the error/configuration and a file containing a screen of the error in the log file. I've tried using port 26 and 465. Help!!!

I'm trying to add this series to my Plex environment, but am about to pull my hair out. The NZB files I find all seem to be for the wrong episodes. It might say S09E21, but playing the video is for a totally different show. I go to The TVDB and look up the first season to find five shows, but Wikipedia will list six shows. Importing in to Plex will show as episode 21, but season one only had five or six episodes. In short, I'm seeing inconsistencies between the actual nzb files, Plex nameing, and The TVDB. Has anyone else seen this is the past? How did you resolve it?

The RJ-45 connector is labled as "IOIOIOI". To me that looks like a serial connection, but I'll try getting a cable that's USB (APC side) to USB(server-side). There wasn't a cable that came with the UPS.

I have an SM1500-2UC that I'm trying to connect to a Supermicro G-2U-X10DRU server. I first tried an RJ-45 to a DB-9 serial cable. I tried all the different combinations of cable on apcupsd to no avail. I then tried an RJ-45 to USB cable with apcupsd giving the same "LOst communications' error. Can someone help me get this figured out?

I had Plex Email running on a Windows 10 PC using Scheduled Tasks and then it just stopped around the first of 2021. I've since moved to Unraid and having everything working pretty well, but I want to get PlexEmail running, again. I've copied my Windows 10 Install location (all Python) , but I can't seem to get it to work properly. Does anyone have some suggestions or have a similar environment up and running?

I took out the movie folder Action-Adventure and it all worked well. Why would a movie root file with a hyphen not work?